Results 1 to 20 of 45
Threaded View
-
04-24-2010 #1
Registered User
- Join Date
- Apr 2010
- Location
- Sunny Flordida
- Posts
- 345
Tried all I know but just won't start!!!
Car is a '68 Firebird with a 350, holley carb. Just replaced the points distributor with an HEI. While at it, I replaced the wires. Keeps seeming soooo close to starting, but just won't. Also, as I move the distributor around, it spits fuel up & out of the carb sometimes, depending on where the distributor is. Smells like it's getting WAY too much fuel. I ran the power to the distributor from an unused, keyed hot post on the fuse panel. My multimeter says 11.98 volts at the post I attached to. I made sure TDC and plug wires in right order. What am I missing? Please give me some ideas on what else to check. Thanks!
-
Reply With Quote
