Proprotioning valve location

[JRouche]

I mounted mine at the line just to the rear of my seat. My line just happens to pass on the drivers side. I mounted it so the shaft of the adjuster knob goes through the floor. I think I removed the knob to keep the hole small. Then reattached the knob. So I can drop my left hand to just behind the seat and turn the knob while still seated in the car. I thought it would make it nice to be able to adjust the bias while seated in the car. Works good so far. JR

[80 MONZTA]

I mounted mine at the line just to the rear of my seat.

Might not be a good idea if you have kids that will ride in the back seat! Sorry, but that is the first thing that entered my mind. lol