Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 11 of 11
    1. #1
      Join Date
      Dec 2009
      Location
      knoxville, tn
      Posts
      273
      Country Flag: United States

      help....problem with control arm bushings on first gen camaro

      I have a nice new set of first gen tube control arms that have never been used. the bushings are rubber top and bottom. the problem is that one of the concave serrated washers that go under the large washer on the top outside of the upper arm is missing. and of course, you can't buy these washers seperately. you have to buy a shaft kit to get them.

      my question is....what purpose do said washers serve??? I have been told that they are only there to slow down suspension action for a smoother ride and for performance purposes not to use the washers.

      any help is appreciated.

    2. #2
      Join Date
      Aug 2004
      Posts
      2,413
      Im sure what ever company made those arms will help a customer out...

      Nothing says "I built this" better than tool marks and dykem blue..

      Follow my 3 link build. https://www.pro-touring.com/forum/sh...ad.php?t=61592


    3. #3
      Join Date
      Dec 2009
      Location
      knoxville, tn
      Posts
      273
      Country Flag: United States
      Quote Originally Posted by LowBuckX View Post
      Im sure what ever company made those arms will help a customer out...
      their tech is the one who said the he thought it would be best to throw the washers away.

    4. #4
      Join Date
      Apr 2001
      Location
      Central CA USA
      Posts
      6,114
      Country Flag: United States
      Adding friction to A arm bushings isn't going to smooth out the ride.
      If they say you can go without them then do that, it doesn't look like you have any other option anyway.
      67 Camaro RS that will be faster than anything Mary owns.

    5. #5
      Join Date
      Dec 2009
      Location
      knoxville, tn
      Posts
      273
      Country Flag: United States
      Quote Originally Posted by David Pozzi View Post
      Adding friction to A arm bushings isn't going to smooth out the ride.
      If they say you can go without them then do that, it doesn't look like you have any other option anyway.
      thanks for the insight, David. I think I might as well just bite the bullet and go with poly or delrin. I can buy polys for what the shaft kit would cost. or, I may go with a good sport spring in the front and delrin bushings as option #2.

    6. #6
      Join Date
      Jan 2010
      Location
      Elk River, MN
      Posts
      676
      I'd go with the delrin bushings over poly any day, poly's add too much unknown spring rate to your front suspension.

    7. #7
      Join Date
      Dec 2009
      Location
      knoxville, tn
      Posts
      273
      Country Flag: United States
      are delrin and del-a-lum bushings the same thing?

    8. #8
      Join Date
      Aug 2004
      Posts
      2,413
      Del-a-lum is a delrin bushing with aluminum shell.
      Nothing says "I built this" better than tool marks and dykem blue..

      Follow my 3 link build. https://www.pro-touring.com/forum/sh...ad.php?t=61592

    9. #9
      Join Date
      Apr 2001
      Location
      Central CA USA
      Posts
      6,114
      Country Flag: United States
      Del-A-Lum was originated by Global West Suspension, they named it and did a LOT of research and development on their bushings, including use on taxicabs! Other companies use similar construction, but maybe not identical. Delrin is a brand name, like Kleenex is for facial tissues. The material used is Acetal. There are a couple of types of Acetal, one is more pure Acetal, the other is reinforced Acetal with Fiberglass strands. The Fiberglass reinforced Acetal is stronger, (but makes you itch when you machine it). You won't find Acetal mentioned in the bushing ads though, they usually just mention Delrin.

      Polyurethane is sticky, tends to deform under high pressure. It will add at least 30 lbs to your spring rates when used in a arm bushings. It's not bad on sway bar mounts and end links if it isn't clamped too hard and is lubed with silicone grease.
      David
      67 Camaro RS that will be faster than anything Mary owns.

    10. #10
      Join Date
      Dec 2009
      Location
      knoxville, tn
      Posts
      273
      Country Flag: United States
      thanks for the info, guys. delrin it is. I can now see how they should allow the springs and shocks to do their jobs better than poly would allow.

    11. #11
      Join Date
      Aug 2004
      Posts
      2,413
      Quote Originally Posted by David Pozzi View Post
      Del-A-Lum was originated by Global West Suspension, they named it and did a LOT of research and development on their bushings, including use on taxicabs! Other companies use similar construction, but maybe not identical. Delrin is a brand name, like Kleenex is for facial tissues. The material used is Acetal. There are a couple of types of Acetal, one is more pure Acetal, the other is reinforced Acetal with Fiberglass strands. The Fiberglass reinforced Acetal is stronger, (but makes you itch when you machine it). You won't find Acetal mentioned in the bushing ads though, they usually just mention Delrin.

      Polyurethane is sticky, tends to deform under high pressure. It will add at least 30 lbs to your spring rates when used in a arm bushings. It's not bad on sway bar mounts and end links if it isn't clamped too hard and is lubed with silicone grease.
      David
      Didnt know anyone one was knocking them off. I just figured Del-a-lum construction = Global west only...
      Nothing says "I built this" better than tool marks and dykem blue..

      Follow my 3 link build. https://www.pro-touring.com/forum/sh...ad.php?t=61592




    Advertise on Pro-Touring.com