Line Lock kit recommendations?

[1969CamaroRS]

Who makes a good line lock kit? Hurst? Moroso? Any suggestions or experiences with different kits would be welcome. Would be going into a 69 Camaro.



Thanks in advance!

[NOT A TA]

I've had Hurst kits with no problems.

[racecrafter]

I have run most of the common brands at one time or another....no real difference. but you might want to invest in a brake pressure gage to go with it.

[minendrews68]

I have the Hurst version, no problems..

[MonzaRacer]

Hurst and rebuildable too, I still have my old one!

[1969CamaroRS]

Hurst seems the clear favorite.

[andrewb70]

I've had great luck with these solinoids:

http://store.summitracing.com/partde...5&autoview=sku

It comes bare, which is just fine, because I always end up using my own wiring, switch, and indicator lamp.

Andrew

[Skip Fix]

The Summit brand side by side looks identical to the Hurst.

[Rallye455]

Never had a problem with the Hurst.

[Bryce]

i have a summit one, it works good and good price.

[buds87gn]

Hurst... all the way, i knew someone who had a solinoid fail a mile or so from his house, lets just say that the flat spots on his front tire from the ride home made for a bumpy ride...

[MarkM66]

Hurst... all the way, i knew someone who had a solinoid fail a mile or so from his house, lets just say that the flat spots on his front tire from the ride home made for a bumpy ride...

So when they fail then lock the brakes up?

[69dragracer]

I have used both the Hurst and the Jegs brand, no problems with either one.

[1969CamaroRS]

Thanks for all the suggestions, ended up ordering a Hurst unit from Summit.

[65BBODY]

Well since you got that one, now is the time to post a video of you using the thing!!
How did your install go? I bought a LL and did not end up putting it in cause it was a little too over my head.

[1969CamaroRS]

I won't get the piece until tomorrow. Hopefully later this week or next it should go in. I'll post pics then, still a bit aways from being able to demo the thing (still have a few things + electrical to do).

[1969CamaroRS]

Here is some pics of the line-lock installed:





Still have some minor adjustment shortening of the brake lines to get them away from the headers a bit.

Bracket is made out of 1/8" thick steel that was polished and then powder coated clear. My first time trying the clear and I guess the heat discolored the clear or the steel a bit, now has a bronze tint to it, but actually looks very interesting.

[Skip Fix]

Slick bracket!!

[mnm99]

B+M here