Results 1 to 10 of 10
Thread: powder coating wheels?
-
03-21-2009 #1
Registered User
- Join Date
- Jul 2008
- Location
- boones creek tennessee
- Posts
- 21
powder coating wheels?
is it possible to powder coat aluminum wheels without any problems with flaking or wear from mounting tires?
a poor man has poor ways.
-
03-21-2009 #2
Registered User
- Join Date
- Dec 2004
- Location
- Beaufort , NC
- Posts
- 1,849
Most powder I have seen would not hold up very long when mounting.
1968 F100 sb full vic chassis swap
1965 Mustang coupe 347 5 spd cheap touring SOLD
2003 Porsche 996 Outlaw LS2 swap SOLD
1992 Lexus SC400 daily SOLD
1966 Porsche 912 Outlaw SOLD
1968 Ford F-100 sb SOLD
-
03-21-2009 #3
Registered User
- Join Date
- Sep 2007
- Location
- Edmonton, Alberta
- Posts
- 291
Co-worker did his passat's wheels in black. He's using them for his winter rubber. With all the gravel, salt, and afore mentioned mounting they are still looking great. No chips or flakes. Guess it comes down to how good your powdercoater is and how good your tire shop is.
-
03-21-2009 #4
Registered User
- Join Date
- Aug 2004
- Location
- Red Deer, Alberta, Canada
- Posts
- 1,364
Another question about powder coating... Can a guy powder coat chrome wheels?
Matt
72 Chevelle 370ci, 76mm single turbo, TKX, Speedtech Track Time, Millerbuilt Strange full floater 9", Brembo brakes, BC Forged 18x11s with 315s square
Instagram: Cst_koon
-
03-22-2009 #5
Registered User
- Join Date
- Oct 2008
- Location
- Roseville
- Posts
- 286
Yes
-
03-22-2009 #6
Registered User
- Join Date
- Sep 2008
- Posts
- 58
Don't guys like Rushforth powder coat wheels? If so, I would not see any problems.
-
03-22-2009 #7
Registered User
- Join Date
- Aug 2008
- Location
- new braunfels, tx
- Posts
- 545
powder is perfectly fine for wheels. my 17" wheels were stripped and PC'ed 3 years ago, still look great today. go to http://forum.eastwoodco.com/forumdis...daysprune=&f=9 and you can find hundreds of pictures of wheels (cast aluminum, forged, billet, magnesium - ALL of em) that have been powder coated.
-
03-22-2009 #8
Registered User
- Join Date
- Dec 2004
- Location
- Beaufort , NC
- Posts
- 1,849
I think you will find that unless the chrome is stripped the powder will not last.....
Originally Posted by protour_chevelle
1968 F100 sb full vic chassis swap
1965 Mustang coupe 347 5 spd cheap touring SOLD
2003 Porsche 996 Outlaw LS2 swap SOLD
1992 Lexus SC400 daily SOLD
1966 Porsche 912 Outlaw SOLD
1968 Ford F-100 sb SOLD
-
03-22-2009 #9
Registered User
- Join Date
- Aug 2004
- Location
- Red Deer, Alberta, Canada
- Posts
- 1,364
hmmm, I need to run 18's in the front now and want to run the c5 z06's still so I was going to get 18x9.5 knock offs for the front, and powder coat to match. Maybe I'll get them stripped too. Originally Posted by Restomod
Matt
72 Chevelle 370ci, 76mm single turbo, TKX, Speedtech Track Time, Millerbuilt Strange full floater 9", Brembo brakes, BC Forged 18x11s with 315s square
Instagram: Cst_koon
03-22-2009 #10
Registered User
- Join Date
- Aug 2008
- Location
- new braunfels, tx
- Posts
- 545
you should join the eastwood forum that i linked to above. a few of the guys on there have coated over chrome and had excellent results. it all depends on who chromed said component. they've all basically figured out that you can't coat over harley davidson chrome. at the very least go to www.thepowdercoater.com and email the owner, mike. he can direct you on what you should do w/ your specific wheels. Originally Posted by protour_chevelle
Tags for this Thread
Reply With Quote
