Results 1 to 9 of 9
Thread: Camaro vs Nova Floor Pan?
-
12-17-2008 #1
Registered User
- Join Date
- Feb 2006
- Location
- Anderson, SC
- Posts
- 81
Camaro vs Nova Floor Pan?
We have a driveshaft safety loop configured to match the floor pan for the '67 - 69 F-body.
Should this driveshaft loop also fit the floor pan of the 1969 Nova? Is the floor pan the same or similar?
Thanks for any help,
Rick2010 Camaro RS/SS
2009 Challenger SRT8
1986 Monte Carlo SS
http://metcomotorsports.com/proddeta...?prod=1986MCSS
1984 Monte Carlo SS
http://metcomotorsports.com/proddeta...?prod=1984MCSS
-
12-17-2008 #2
Registered User
- Join Date
- Mar 2008
- Location
- Everett, WA
- Posts
- 501
Pics would really help. I know that the front clip is the same thing between the Camaro and the Nova. Where/how does the loop fit?
The few, the proud, the crazy... the LT1 owners.
-
12-17-2008 #3
Registered User
- Join Date
- Feb 2006
- Location
- Anderson, SC
- Posts
- 81
Here's the F-body loop:
http://www.metcomotorsports.com/prod...p?prod=MDL7000
The flanges are welded to the ring to match the contours of the factory floor pan at the front u-joint.
I checked with Year One and they show different part numbers for replacement floor pan sections for the Camaro & Nova.
-
12-17-2008 #4
Registered User
- Join Date
- Mar 2008
- Location
- Everett, WA
- Posts
- 501
Tell you what... send me one, and I'll test fit it for you.
Yes, the floor pans are different part numbers, but I'm pretty sure the contour in the trans tunnel area is the same between the two. There is one really good way to find out...
The few, the proud, the crazy... the LT1 owners.
-
12-17-2008 #5
Registered User
- Join Date
- Mar 2006
- Location
- Los Angeles, CA
- Posts
- 450
The pans are way different. The tranny tunnel in a camaro is far deeper and has most notably a highly angled tunnel. The nova tunnel is smaller and without the angled edges that put the tranny so high in the car. But, not to fear: We are hot rodders. We can do this kind of stuff.
-
12-17-2008 #6
Registered User
- Join Date
- Mar 2008
- Location
- Everett, WA
- Posts
- 501
Shuddup dude!! I'm trying to score a free driveshaft loop here... LOL!
Originally Posted by carguy502
The pans are way different. The tranny tunnel in a camaro is far deeper and has most notably a highly angled tunnel. The nova tunnel is smaller and without the angled edges that put the tranny so high in the car. But, not to fear: We are hot rodders. We can do this kind of stuff.
Sounds like with some shimming, it could be made to work...
I do test fitting for free, and take pics... 
The few, the proud, the crazy... the LT1 owners.
12-17-2008 #7
Registered User
- Join Date
- Mar 2006
- Location
- Los Angeles, CA
- Posts
- 450
LOL... my bad. Like I said, you can make it fit! Originally Posted by 69LT1Nova
Shuddup dude!! I'm trying to score a free driveshaft loop here... LOL!
Sounds like with some shimming, it could be made to work... I do test fitting for free, and take pics...
12-17-2008 #8
Registered User
- Join Date
- Aug 2004
- Posts
- 2,413
Blank ..
Nothing says "I built this" better than tool marks and dykem blue..
Follow my 3 link build. https://www.pro-touring.com/forum/sh...ad.php?t=61592
12-19-2008 #9
Registered User
- Join Date
- Feb 2007
- Location
- USA, TN
- Posts
- 850
As stated by carguy, the floor pans are vastly different in some ways. In other ways they are identical. Because they use the same subframe, the mount points and the distances between the mount points are the same. If your front loop bolts to the frame anywhere, it should bolt to both a first gen Camaro and 3rd gen Nova. The rear spring mount points should be very close to the same as well. The use the same components and mounting dimensions for the rear springs. The Nova tunnel is a lot smaller. I would think a driveshaft hoop could be made to fit both cars, but your starting point should be a Nova. If you didn't make a huge loop for the Camaro and you mounted it nearl one of the common dimensions, it may fit a Nova.
We really need pics and dimensions.
Reply With Quote
