Results 1 to 2 of 2
Thread: LS3 ECU Dimensions
-
10-10-2017 #1
Registered User
- Join Date
- Jun 2015
- Posts
- 22
LS3 ECU Dimensions
I am working on mocking everything up under the dash on my 69 Camaro project. Real estate gets tight pretty quick with wire harness, Vintage Air Gen 4 unit and ducting etc...
Don't have an ECU yet for the LS3 and I was wondering if somebody could provide overall L x W x H dimensions for the ECU so I can mock up a bracket and make sure i allow enough room.
If anyone has pics of how they mounted their ECU please share.
Thanks!
-
10-11-2017 #2
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 16,117
Presumably you are asking about the GMPP kit that uses the e67 ECU? Just Googling around I found 9x8x4 inches. This sounds about right. The 4 inch height is with the connectors plugged in. There are numerous images available for reference.
Originally Posted by plick1221
Andrew1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @dr__efi
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
Reply With Quote
