Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 7 of 7
    1. #1
      Join Date
      Jun 2010
      Location
      Deployed
      Posts
      3,376
      Country Flag: United States

      ECM mounting. Is this too close??

      Location options are low!!!
      Attached Images Attached Images      
      1970 Camaro/DSE build


      Are you driver enough? Maybe....come on blue!
      https://www.pro-touring.com/threads/...71#post1147371

    2. #2
      Join Date
      May 2010
      Location
      kitchener,Ontario,Canada
      Posts
      2,359
      Country Flag: Canada
      I definitely wouldn't put it anymore closer , I'd say the farther away the better . So if you have room move it away a bit otherwise run it and see if it causes any issues
      Spinnin'my tires in life's fast lane

      Ryan Austin
      On twitter ... soon to be revived ...
      On Instagram ryanaustinss70

    3. #3
      Join Date
      Feb 2011
      Location
      dallas, tx
      Posts
      1,731
      Country Flag: United States
      Why not inside? Speartech grommet, on the firewall behind the engine



    4. #4
      Join Date
      Dec 2010
      Location
      Fredericksburg, VA.
      Posts
      3,164
      Country Flag: United States
      If you leave it there, I would suggest installing some sort of heat shielding to protect it from header heat.
      Steve Hayes
      "Dust Off"
      68 Camaro

      Support the RPM Act
      https://www.sema.org/rpm-faq.

    5. #5
      Join Date
      Sep 2004
      Location
      Metamora, Illinois
      Posts
      1,620
      If it must go there I would wrap the headers.

    6. #6
      Join Date
      Jun 2010
      Location
      Deployed
      Posts
      3,376
      Country Flag: United States
      Quote Originally Posted by icemanrd19 View Post
      Why not inside? Speartech grommet, on the firewall behind the engine
      There's nowhere it mount it inside. I was going to put it in the wheel well but the coolant hoses took up more room then I thought. It probably got bad air flow too.
      1970 Camaro/DSE build


      Are you driver enough? Maybe....come on blue!
      https://www.pro-touring.com/threads/...71#post1147371

    7. #7
      Join Date
      Nov 2006
      Location
      Mountain Springs, Texas
      Posts
      4,880
      Country Flag: United States
      A simple bent aluminum heat shield will keep it cool as suggested above.

      Don
      1969 Camaro - LSA 6L90E AME sub/IRS
      1957 Buick Estate Wagon
      1959 El Camino - Ironworks frame
      1956 Cameo - full C5 suspension/drivetrain
      1959 Apache Fleetside




    Advertise on Pro-Touring.com