Results 1 to 9 of 9
Thread: Help with brake issue
Hybrid View
-
10-02-2016 #1
Registered User
- Join Date
- Aug 2016
- Location
- Tampa FL
- Posts
- 97
a larger bore master cylinder should give you a SOFTER pedal.
-
10-02-2016 #2
Registered User
- Join Date
- Jun 2013
- Posts
- 6
Yeah, but it will also shorten the stroke.
Originally Posted by Dark Pursuit
I think CosNova805 nailed it. When I first did the suspension and brakes on the car I took it for a drive and thought the braking wasn't quite right and that it probably still had some air in the system. Not long after that I pulled the motor for an LS swap. While the car was apart, I cut and welded the angled brackets I had to make the booster and master parallel with the firewall. When I put it back together I used the upper hole without any thought to the ratio change. After quite a while when I first drove the car again, I remembered only thinking the brakes had a pedal feel issue previously and that it was worst than I remembered. I going to try it again with a new set of angled mounting brackets, the lower hole on the pedal, and a complete bleed job. Hopefully that will take care of it.
Reply With Quote
