Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 8 of 8
    1. #1
      Join Date
      Feb 2010
      Location
      NE Arkansas
      Posts
      617

      Spectre Fuel Tank venting questions?

      I just ordered a GM42BFI EFI tank for my 71 camaro and had questions regarding the venting for you guys that have one.


      I didn't see any kind of venting feature on the tank to release tank pressure? Is there something built into the pump / sending unit?


      If not how are you doing it? With a vented gas cap or something else?


      Wanted to have this figured out before I get the tank in case I need to order something. Wanted to avoid waiting another week after I get the tank.


      Thanks again
      My build thread

      http://www.nastyz28.com/forum/showthread.php?t=241037

      Paint Jail Experience

      https://sites.google.com/site/paintjail/home

    2. #2
      Join Date
      Feb 2010
      Location
      NE Arkansas
      Posts
      617
      Got a reply from a member that venting was part of the sending unit on these, so I think I am good
      My build thread

      http://www.nastyz28.com/forum/showthread.php?t=241037

      Paint Jail Experience

      https://sites.google.com/site/paintjail/home

    3. #3
      Join Date
      Nov 2008
      Location
      Lawrenceburg, TN
      Posts
      4,098
      Country Flag: United States
      the factory cap was vented, and almost all replacement caps are also...no need to vent stock..such as and external pump system going to a carb....if you use an intank pump then it may need a vent....if you use a racing style fuel cap(like the ridetech style) then it needs a vent,,,.if your using fuel injection and the air flow needs to match the fuel flow....

    4. #4
      Join Date
      Jan 2005
      Location
      Appleton WI
      Posts
      377
      Country Flag: United States
      Quote Originally Posted by Rod View Post
      ....if you use an intank pump then it may need a vent....if you use a racing style fuel cap(like the ridetech style) then it needs a vent,,,.if your using fuel injection and the air flow needs to match the fuel flow....
      Rod,
      I'm currently researching this to install a tip valve and vent in my 68 Camaro. I'll be using the ridetech cap and a Rick's/vaporworx tank with pwm control and changing the Edelbrock 35520 over to a returnless system. How do I determine the vent air flow requirements without brake specific fuel consumption numbers due to the current return system?
      Also, venting the tank into the car makes me nervous. Where is yours vented?
      Jim

      1968 Camaro --502HO, ATI 10" TreeMaster, Hughes TH400 with Gear Vendor's OD, Moser 12-bolt, RideTech StrongArms and MuscleBar, Chris Alston G-bar rear suspension, 2 1/8" by 4" Lemon's Headers through 3" Pypes X-pipe and Hooker AeroChambers.


    5. #5
      Join Date
      Nov 2006
      Location
      Mountain Springs, Texas
      Posts
      4,880
      Country Flag: United States
      Quote Originally Posted by camrat68 View Post
      Rod,
      I'm currently researching this to install a tip valve and vent in my 68 Camaro. I'll be using the ridetech cap and a Rick's/vaporworx tank with pwm control and changing the Edelbrock 35520 over to a returnless system. How do I determine the vent air flow requirements without brake specific fuel consumption numbers due to the current return system?
      Also, venting the tank into the car makes me nervous. Where is yours vented?
      Jim
      Never mind....
      1969 Camaro - LSA 6L90E AME sub/IRS
      1957 Buick Estate Wagon
      1959 El Camino - Ironworks frame
      1956 Cameo - full C5 suspension/drivetrain
      1959 Apache Fleetside

    6. #6
      Join Date
      Apr 2016
      Posts
      245
      Check out II Much venting system as I am doing research on tank venting as well

    7. #7
      Join Date
      Jan 2005
      Location
      Appleton WI
      Posts
      377
      Country Flag: United States
      Quote Originally Posted by dhutton View Post
      Never mind....
      I'm sorry?

      Jim
      1968 Camaro --502HO, ATI 10" TreeMaster, Hughes TH400 with Gear Vendor's OD, Moser 12-bolt, RideTech StrongArms and MuscleBar, Chris Alston G-bar rear suspension, 2 1/8" by 4" Lemon's Headers through 3" Pypes X-pipe and Hooker AeroChambers.

    8. #8
      Join Date
      Jan 2005
      Location
      Appleton WI
      Posts
      377
      Country Flag: United States
      I see now.

      The II Much side-mount with integral filter should do the trick. :D

      Jim
      1968 Camaro --502HO, ATI 10" TreeMaster, Hughes TH400 with Gear Vendor's OD, Moser 12-bolt, RideTech StrongArms and MuscleBar, Chris Alston G-bar rear suspension, 2 1/8" by 4" Lemon's Headers through 3" Pypes X-pipe and Hooker AeroChambers.




    Advertise on Pro-Touring.com