Results 1 to 20 of 20
Threaded View
-
02-09-2016 #2
Registered User
- Join Date
- Jan 2006
- Location
- Oregon
- Posts
- 1,773
Personally, I would just cut the hard lines and flare them with the proper tube nuts, avoiding the adapter fittings all together. If both of your hard lines are 3/16" tubing, that should be an option, as teh 3/8-24 tube nuts are the smallest you can run with 3/16" tubing. If one or both are 1/4" tubing, then the smallest tube nut you can run with 1/4" tubing is 7/16-24 inverted flare (or M11x1.5). That said, most adapter fittings are to run smaller tube nuts into the larger OEM GM MC outlet ports, however you would need the fittings below, and I'm not sure that they exist.
3/8-24 male inverted flare X 1/2-20 female inverted flare
3/8-24 male inverted flare X 9/16-18 female inverted flare
Now I can get there with multiple fittings per port, but that gets ugly fast and just increases the likelihood for leaks IMO.
Tobin
KORE3It's what I does.
-
Reply With Quote
