Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 2 of 4 FirstFirst 1 2 3 4 LastLast
    Results 21 to 40 of 78

    Thread: 80 Camaro Build

    1. #21
      Join Date
      Feb 2015
      Location
      Montana
      Posts
      183
      Country Flag: United States
      Quote Originally Posted by NOT A TA View Post
      Coming along nicely!

      I used a 81 subframe in a 70 body so I've been through moving the body mount holes in a late style frame. Using a late frame with the early rear body mount position you'll notice the way the frame metal is overlapped and welded inside the frame where the new mount hole is will cause a solid body mount to be tipped inside the frame. You may want to make a spacer shaped to fit so the body mount bushing sits flat inside the frame. Depending on the frame connectors you have you'll probably also need to trim the indentation at the rear of the frame rail on one side to slide the early style frame connector into the rail. Hopefully you have frame connectors made for the early style body mount.

      In the pic below you can see the spacer I put in mine and how the rail's been trimmed to slide in the connector. I fully boxed mine afterward and trimmed the bushing between the body and frame to compensate but that might be overkill. Details of all the frame mods (done so far)are in my build thread.

      I like what you did better than what I did. Instead of adding material I just removed enough so the solid body mount would sit flat. I'm planning on using Custom Works 2G sub frame connectors. Going to weld connectors at subframe, floor, and rear frame rails. Haven't test fit connectors yet, but plan on adding metal to box in the rear of the subframe once connectors are in.
      Name:  image.jpg
Views: 1488
Size:  80.7 KBName:  image.jpg
Views: 1493
Size:  162.1 KBName:  image.jpg
Views: 1486
Size:  220.3 KB

    2. #22
      Join Date
      Feb 2015
      Location
      Montana
      Posts
      183
      Country Flag: United States
      I was able to get the subframe buttoned up for now. Still need a steering gear, so my old idler arm will help me roll this thing around. On to the next project, need to get seats ordered and roll bar. I'm between corbeau cr1's and lg1's. I was set on the cr1's, but I've heard the lg1's fit the 2nd gens well. Nobody stocks these seats anywhere close to where I live, I'm 6'3" 225lbs. I'm nervous about buying seats without trying them out. For the roll cage, I'm thinking auto weld 6 point, with road race style door bars. I'm also thinking of adding a seat belt bar for the rear seats, 5 point harness so I can still have a functional back seat and feel ok about it. That's the plan for now, have a great New Year.
      Name:  image.jpg
Views: 1511
Size:  224.5 KBName:  image.jpg
Views: 1472
Size:  202.8 KB

    3. #23
      Join Date
      Mar 2007
      Location
      Florida
      Posts
      2,391
      Country Flag: United States
      Those connectors look nice! I have the some old CE imitations I bought back in the 90's that slide inside the sub frame and mount to the rear spring pocket. I've since modified so they have a small bracket that bolts to the rear rail but won't be as good as the ones you've got there that weld directly to the rear rail.

    4. #24
      Join Date
      Feb 2015
      Location
      Montana
      Posts
      183
      Country Flag: United States
      I think I've narrowed down my roll cage options, decided to go with a 10 point through the dash. Going to make a phone call to Auto Weld Chassis and S&W Race Cars for some last minute questions to make my decision on which company. I also decided to go with Corbeau LG1's for seats.

      The only thing I've managed to get done is build a tubing straightner for 3/16". No way I was going to spend $85-300 for a simple straightner. I used patio door rollers, nylon spacers, boat cleat, and 2" aluminum strap. This thing works amazing.
      Name:  image.jpg
Views: 1401
Size:  172.1 KBName:  image.jpg
Views: 1426
Size:  193.8 KB

    5. #25
      Join Date
      May 2015
      Location
      Island Lake, IL
      Posts
      816
      Country Flag: United States
      Nice Build! I dig the coil over mod.

    6. #26
      Join Date
      May 2015
      Location
      North central Montana
      Posts
      83
      Country Flag: United States
      I just re-read thru your build as I had missed a few things the first time. That is a prettty cool tool you made, and it looks as though you are a great welder. Mine do not look quite so nice, but at least they hold. I like the mods you made on the coilover brackets. Looks like your coming along nicely. I subscribed to your build and look forward as you progress.
      Bruce Jeppesen
      "RANGERS LEAD THE WAY"
      1966 Chevelle
      1978 Ford F-150 4x4
      1930 Model
      https://www.pro-touring.com/threads/1...e-PT-Challenge

      Need more time, more money and more ambition!!!

    7. #27
      Join Date
      Oct 2005
      Location
      Montana
      Posts
      15
      Country Flag: United States
      Keep up the good work! Nice to see a build from Montana! Ill try and check back for updates!



    8. #28
      Join Date
      Feb 2015
      Location
      Montana
      Posts
      183
      Country Flag: United States
      Quote Originally Posted by F-Body International View Post
      Nice Build! I dig the coil over mod.
      Thanks, I really like the extra work your putting into your car to keep the factory/sleeper look

    9. #29
      Join Date
      Feb 2015
      Location
      Montana
      Posts
      183
      Country Flag: United States
      Quote Originally Posted by Pt109 View Post
      I just re-read thru your build as I had missed a few things the first time. That is a prettty cool tool you made, and it looks as though you are a great welder. Mine do not look quite so nice, but at least they hold. I like the mods you made on the coilover brackets. Looks like your coming along nicely. I subscribed to your build and look forward as you progress.
      First off, I see "RANGERS LEAD THE WAY", thank you for your service.

      Thanks for the kind words. Looking at other people's welds on this forum...I'm afraid to post pics of mine, definitely got a lot of room to improve. Look forward to seeing some pics on your build.

    10. #30
      Join Date
      Feb 2015
      Location
      Montana
      Posts
      183
      Country Flag: United States
      Quote Originally Posted by HeadInTheClouds View Post
      Keep up the good work! Nice to see a build from Montana! Ill try and check back for updates!
      Great to hear from another guy from MT, just met Pt109 a couple days ago, great guy. Us Montana guys have to stick together, we're kind of a minority on this forum.

    11. #31
      Join Date
      Feb 2014
      Location
      Boise , Idaho
      Posts
      320
      Country Flag: United States
      Just checked out your thread , looking good !

      Just got done turning my rear axles down for the Kore3 z51 rear brakes so its good to see someone elses installed for motivation .

    12. #32
      Join Date
      Feb 2011
      Location
      Maple Ridge, BC Canada
      Posts
      209
      Country Flag: Canada
      Nice work!
      Cute kids too!!!

    13. #33
      Join Date
      Oct 2005
      Location
      Montana
      Posts
      15
      Country Flag: United States
      Quote Originally Posted by MTZ28 View Post
      Great to hear from another guy from MT, just met Pt109 a couple days ago, great guy. Us Montana guys have to stick together, we're kind of a minority on this forum.
      What side are you on? It only takes like 10 hours to drive across the state. Lol. I'm in the northeastern part. I'm only like 10 blocks from the Nd state line. Sparsely populated over here.

    14. #34
      Join Date
      Feb 2015
      Location
      Montana
      Posts
      183
      Country Flag: United States
      Quote Originally Posted by HeadInTheClouds View Post
      What side are you on? It only takes like 10 hours to drive across the state. Lol. I'm in the northeastern part. I'm only like 10 blocks from the Nd state line. Sparsely populated over here.
      I'm also in the NE, pm sent

    15. #35
      Join Date
      May 2015
      Location
      North central Montana
      Posts
      83
      Country Flag: United States
      Well at least there are 3 of us now that we know of. I see we have some of the guys north of the border and some arent all that far away, atleast by our distance standards. I went to a 4th of July celebration a couple of years ago they are just 6 houses east of me. However it is 18 miles to get to that neighbors place. Told some friends of mine that from the city and they thought I was just teasing them. When we get our cars on the road we need to see how long it takes from Idaho to North Dakota, try and trim that 10 hour thing down. LOL
      Bruce Jeppesen
      "RANGERS LEAD THE WAY"
      1966 Chevelle
      1978 Ford F-150 4x4
      1930 Model
      https://www.pro-touring.com/threads/1...e-PT-Challenge

      Need more time, more money and more ambition!!!

    16. #36
      Join Date
      Feb 2015
      Location
      Montana
      Posts
      183
      Country Flag: United States
      When we get our cars on the road we need to see how long it takes from Idaho to North Dakota, try and trim that 10 hour thing down. LOL[/QUOTE]

      Definitely down with that, great idea.

    17. #37
      Join Date
      Feb 2015
      Location
      Montana
      Posts
      183
      Country Flag: United States
      Quote Originally Posted by FirebirdSteve View Post
      Nice work!
      Cute kids too!!!
      Thank you Sir.

    18. #38
      Join Date
      Feb 2015
      Location
      Montana
      Posts
      183
      Country Flag: United States
      Been a little slow around here, but managed to get a few things done.

      Removed the front clip, and removed all the components off the firewall. I was a little afraid of what I was going to find on the lower cowl. Luckily the only rust was a small spot on the bottom of the drivers lower cowl. New drivers side cowl panel in the mail.

      Name:  image.jpg
Views: 1153
Size:  252.4 KB
      Attached Images Attached Images  

    19. #39
      Join Date
      Feb 2015
      Location
      Montana
      Posts
      183
      Country Flag: United States
      Made some brake lines for the rear diff. Used 3/16" cunifer from fedhill, highly recommend. Very easy to work with, make great flares.


      Name:  image.jpg
Views: 1110
Size:  140.9 KBName:  image.jpg
Views: 1116
Size:  142.7 KB

    20. #40
      Join Date
      Feb 2015
      Location
      Montana
      Posts
      183
      Country Flag: United States
      My impulse buy, an LY6 with 36,000 out of a FedEx van. It had a really questionable story, but the price was right, so I took a chance.

      Name:  image.jpg
Views: 1110
Size:  207.9 KB
      Attached Images Attached Images  

    Page 2 of 4 FirstFirst 1 2 3 4 LastLast



    Advertise on Pro-Touring.com