Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 12 of 12
    1. #1
      Join Date
      Feb 2010
      Location
      Austin, TX
      Posts
      111
      Country Flag: United States

      Reinforcing Stock Lower Control Arms (LCA)

      I remember a while back seeing a post on reinforcing the stock lower control arms, but when it came time to actually do it I had a hard time finding anything so I decided I would share how I went about it in hopes that it might help some of those guys (like me) on a tight budget and looking to save a little $$ by reinforcing the stock lowers.

      If I remember right, the method I saw was to completely cover the bottom of the control arm boxing it in. After looking at the control arm stamping I decided to go a different route since one side of the arm is raised a little higher than the other so covering it with one piece didn't seem like the best method to me.

      I used 1/8" angle steel and followed the indent on each side to create a square tube frame. I made a number of cuts down the side of the angle and scored the top of the piece to form it. Before welding the pieces in I welded the cuts up and smoothed them out. I am not the greatest welder, but I'm learning.
      Name:  LCA9.jpg
Views: 2136
Size:  108.2 KB
      (I straighten the dent out on the other side.)
      Name:  LCA11.jpg
Views: 2681
Size:  236.4 KB
      Name:  LCA12.jpg
Views: 2236
Size:  214.6 KB
      Name:  LCA10.jpg
Views: 1933
Size:  221.8 KB



      Same thing was done on other side. Also created a piece for the front and back to complete the triangular frame.
      Name:  LCA13.jpg
Views: 2245
Size:  232.9 KB
      I also wrapped a strip of 1/8 steel around the ball joint pocket then welded and smoothed of course.
      Name:  P1010294.jpg
Views: 2018
Size:  197.8 KB
      And the finished product vs Stock.....
      Name:  P1010295.jpg
Views: 2073
Size:  283.5 KB
      Name:  P1010297.jpg
Views: 2101
Size:  281.7 KB
      Name:  P1010292.jpg
Views: 1842
Size:  224.5 KB

      They will soon be equipped with Moog ball joints and DSE bushings. Hope this helps....
      Nick
      68' Camaro RS/SS - Current Project
      72' Nova SS


    2. #2
      Join Date
      Nov 2008
      Location
      Lawrenceburg, TN
      Posts
      4,098
      Country Flag: United States
      Quote Originally Posted by 427camaro View Post
      They will soon be equipped with Moog ball joints and DSE bushings. Hope this helps....
      nice job! great ideas, but you hope it helps? what?

    3. #3
      Join Date
      Aug 2005
      Location
      Hamilton, NJ
      Posts
      4,319
      Country Flag: United States
      i think the ball joint are is really the weakest part. the rest may be over kill.
      Scott from NJ.

      Vent Windows Forever! ...

      Feather-light suspension, Konis just couldn't hold
      I'm so glad I took a look inside your showroom doors

    4. #4
      Join Date
      Feb 2010
      Location
      Austin, TX
      Posts
      111
      Country Flag: United States
      Quote Originally Posted by Rod View Post
      nice job! great ideas, but you hope it helps? what?
      Thanks. Hopefully the post is helpful to someone.
      Nick
      68' Camaro RS/SS - Current Project
      72' Nova SS

    5. #5
      Join Date
      Nov 2008
      Location
      Lawrenceburg, TN
      Posts
      4,098
      Country Flag: United States
      Quote Originally Posted by 427camaro View Post
      Thanks. Hopefully the post is helpful to someone.
      oh I get it, sorry, I thought you meant it help the geometry somehow


      Quote Originally Posted by BonzoHansen View Post
      i think the ball joint are is really the weakest part. the rest may be over kill.
      your right Bonzo that's were I have see most of the cracks in stock arms is in the press-in balljoint area

    6. #6
      Join Date
      Feb 2010
      Location
      Austin, TX
      Posts
      111
      Country Flag: United States
      Quote Originally Posted by BonzoHansen View Post
      i think the ball joint are is really the weakest part. the rest may be over kill.
      I think you may be right. I tend to go beyond what is neccesary, but it looks cool. lol
      Nick
      68' Camaro RS/SS - Current Project
      72' Nova SS

    7. #7
      Join Date
      Feb 2010
      Location
      Austin, TX
      Posts
      111
      Country Flag: United States
      [QUOTE]
      Quote Originally Posted by Rod View Post
      oh I get it, sorry, I thought you meant it help the geometry somehow
      Nope. My Speedtech Uppers and gulstrand mod should help with that.
      Nick
      68' Camaro RS/SS - Current Project
      72' Nova SS

    8. #8
      Join Date
      Nov 2008
      Location
      Lawrenceburg, TN
      Posts
      4,098
      Country Flag: United States
      [QUOTE=427camaro;1043623]
      Nope. My Speedtech Uppers and gulstrand mod should help with that.

    9. #9
      Join Date
      Nov 2008
      Location
      So. Cal.
      Posts
      1,240
      Country Flag: United States
      Hey Nick. Loved it. Thats the type of stuff I like and "Try" to do. Your skills are "top notch" , yeah pun also intended Keep the updates going. JR
      What I write is opinion, none of it is factual. 2010

      Even though I'm conscious it doesn't mean I'm coherent. 2011

      I'm getting better with age. Best thing about old age is I don't know any better. 2012

    10. #10
      Join Date
      May 2013
      Location
      Colton Ca.
      Posts
      623
      Country Flag: United States
      Not to be a bubble buster but i think by reinforcing the rest of the A arm you actually made the ball joint area even weaker. The reinforcing that you did doesn't allow the a arm to flex . Since the entire a arm doesn't flex like before the weaker part becomes the ball joint area. It actually makes the ball joint area more likely to break which has always been the weakest part of these a arms....

    11. #11
      Join Date
      Feb 2010
      Location
      Austin, TX
      Posts
      111
      Country Flag: United States
      Quote Originally Posted by JRouche View Post
      Hey Nick. Loved it. Thats the type of stuff I like and "Try" to do. Your skills are "top notch" , yeah pun also intended Keep the updates going. JR
      Thanks, JR! I'm a do it myself type, but I do spend a good bit of time researching things be for a take a swing at most things.
      Nick
      68' Camaro RS/SS - Current Project
      72' Nova SS

    12. #12
      Join Date
      Feb 2010
      Location
      Austin, TX
      Posts
      111
      Country Flag: United States
      Quote Originally Posted by Build-It-Break-It View Post
      Not to be a bubble buster but i think by reinforcing the rest of the A arm you actually made the ball joint area even weaker. The reinforcing that you did doesn't allow the a arm to flex . Since the entire a arm doesn't flex like before the weaker part becomes the ball joint area. It actually makes the ball joint area more likely to break which has always been the weakest part of these a arms....
      Not sure if you saw, but I reinforced the ball joint area as well which is about 1/4 of steel now around the ball joint pocket. My initial intentions were to just do the ball joint area, but this lower arm had been hit pretty hard at some point (curb?) about half way up the arm which I assume would create a vulnerable spot for cracks to form. I decided to go a little further than my initial plan due to that. Did I go a little further than necessary, maybe..? But I think the ball joint area will be ok or I guess I'll find out. lol I do appreciate any opinions or inputs, so no worries.
      Nick
      68' Camaro RS/SS - Current Project
      72' Nova SS




    Advertise on Pro-Touring.com