68 Camaro Classic Truck Consoles .. Anyone??

[majj35]

I finally ordered a console that doesn’t come shifter pre-cut, since mine is relocated for the T56 and din’t want to spend more on a shifter relocation.

I got the Rally Console with the Dash Panel, 2 small cup holders and storage box.

I’m planning to keep my dash parts (vintage Ac, mp3 player) and ill also have to add vinyl/leather on. Also getting TMI sport upholstery seats (should fit)

Who else has the Rally console from Classic Truck Consoles?
67-68-69 Camaro center console, Firebird, rally (http://www.classictruckconsoles.com/rallyconsole-panel-armrest-drinkholders.htm)
170318

Please Share photos, review, tips.

Ill post some after installing.

[blitzer454]

I have a few pictures in my build thread of the same console. (https://www.pro-touring.com/threads/125689-Project-Misguided-Angel-(67-Camaro)?p=1235912#post1235912) I extended the top with fiber glass so that it would fit snug under the center dash and I made a "U" bracket that's located under the cup holder. This way the center console doesn't move around at all. I found using an oscillating multi-tool cuts through the fiber glass the best. Here's an updated picture as I redid the phone tray to tilt the phone up so I could see it better when using Andriod Auto I also refined the flip lid box as I didn't like the gap I had around the original door.
170323
I also brought the storage box, one improvement that I could of made was to cut the top of the box a little further down as I felt that the storage box would have fit a little better. I used a piano hinge to mount the storage lid and I 3d printed a filler piece with an alignment block on the top of the lid so keep the lid from shifting side to side when it is closed.
170322

[majj35]

I have a few pictures in my build thread of the same console. (https://www.pro-touring.com/threads/125689-Project-Misguided-Angel-(67-Camaro)?p=1235912#post1235912) I extended the top with fiber glass so that it would fit snug under the center dash and I made a "U" bracket that's located under the cup holder. This way the center console doesn't move around at all. I found using an oscillating multi-tool cuts through the fiber glass the best. Here's an updated picture as I redid the phone tray to tilt the phone up so I could see it better when using Andriod Auto I also refined the flip lid box as I didn't like the gap I had around the original door.
170323
I also brought the storage box, one improvement that I could of made was to cut the top of the box a little further down as I felt that the storage box would have fit a little better. I used a piano hinge to mount the storage lid and I 3d printed a filler piece with an alignment block on the top of the lid so keep the lid from shifting side to side when it is closed.
170322

Love what you’ve done with it. I like the phone tray! Thanks for sharing