Results 1 to 3 of 3
  1. #1
    Join Date
    Feb 2017
    Location
    Jeddah, KSA
    Posts
    140

    68 Camaro Classic Truck Consoles .. Anyone??

    I finally ordered a console that doesnít come shifter pre-cut, since mine is relocated for the T56 and dinít want to spend more on a shifter relocation.

    I got the Rally Console with the Dash Panel, 2 small cup holders and storage box.

    Iím planning to keep my dash parts (vintage Ac, mp3 player) and ill also have to add vinyl/leather on. Also getting TMI sport upholstery seats (should fit)

    Who else has the Rally console from Classic Truck Consoles?
    67-68-69 Camaro center console, Firebird, rally
    Name:  IMG_1976.jpg
Views: 120
Size:  11.4 KB

    Please Share photos, review, tips.

    Ill post some after installing.
    1968 Camaro SS
    LS2/T56
    Ridetech StreetGrip

  2. #2
    Join Date
    Nov 2011
    Location
    Wylie, Texas
    Posts
    179
    Country Flag: United States
    I have a few pictures in my build thread of the same console. I extended the top with fiber glass so that it would fit snug under the center dash and I made a "U" bracket that's located under the cup holder. This way the center console doesn't move around at all. I found using an oscillating multi-tool cuts through the fiber glass the best. Here's an updated picture as I redid the phone tray to tilt the phone up so I could see it better when using Andriod Auto I also refined the flip lid box as I didn't like the gap I had around the original door.
    Name:  IMG_20191215_073843920.jpg
Views: 115
Size:  216.3 KB
    I also brought the storage box, one improvement that I could of made was to cut the top of the box a little further down as I felt that the storage box would have fit a little better. I used a piano hinge to mount the storage lid and I 3d printed a filler piece with an alignment block on the top of the lid so keep the lid from shifting side to side when it is closed.
    Name:  IMG_20191215_080707918.jpg
Views: 115
Size:  117.3 KB


  3. #3
    Join Date
    Feb 2017
    Location
    Jeddah, KSA
    Posts
    140
    Quote Originally Posted by blitzer454 View Post
    I have a few pictures in my build thread of the same console. I extended the top with fiber glass so that it would fit snug under the center dash and I made a "U" bracket that's located under the cup holder. This way the center console doesn't move around at all. I found using an oscillating multi-tool cuts through the fiber glass the best. Here's an updated picture as I redid the phone tray to tilt the phone up so I could see it better when using Andriod Auto I also refined the flip lid box as I didn't like the gap I had around the original door.
    Name:  IMG_20191215_073843920.jpg
Views: 115
Size:  216.3 KB
    I also brought the storage box, one improvement that I could of made was to cut the top of the box a little further down as I felt that the storage box would have fit a little better. I used a piano hinge to mount the storage lid and I 3d printed a filler piece with an alignment block on the top of the lid so keep the lid from shifting side to side when it is closed.
    Name:  IMG_20191215_080707918.jpg
Views: 115
Size:  117.3 KB
    Love what youíve done with it. I like the phone tray! Thanks for sharing
    1968 Camaro SS
    LS2/T56
    Ridetech StreetGrip