Results 1 to 8 of 8
Thread: Header clearance
-
05-08-2013 #1
Registered User
- Join Date
- May 2013
- Posts
- 5
Header clearance
I have 68 camaro with 383 with richmond six speed. I recently purchased true turn system but it will not clear my headman headers which are 1/3/4. I called Ride tech and they stated that they are pretty sure that the Dynatech headers will work. I need to run 1/3/4 headers on my motor just wondering if anyone has any information or actual application for my car thanks for anybodys help.
-
05-09-2013 #2
New to Pro-Touring
- Join Date
- Mar 2011
- Location
- Pageland SC
- Posts
- 32
I have a 69 small block, Tru Turn, power steering, Dynatechs with no problem. The pitman arm on manual steering is shorter which can cause some problems. I currently still have a Muncie 4 speed, but am in the process of changing to a TKO 600.
05-09-2013 #3
Registered User
- Join Date
- May 2013
- Posts
- 5
Thanks, that will help a bunch.
05-10-2013 #4
Registered User
- Join Date
- May 2013
- Posts
- 42
Spitfire what heads do you have? Are they angle or straight plug?
05-10-2013 #5
Registered User
- Join Date
- Mar 2005
- Location
- St George Utah
- Posts
- 1,243
We have a 69 Camaro in the shop with Dynatech LS headers and they hang down SO LOW it is Ridiculous that a header company would make a header that is 3" below the floor??? they hang 3" below the bottom of the sub frame.
05-11-2013 #6
New to Pro-Touring
- Join Date
- Mar 2011
- Location
- Pageland SC
- Posts
- 32
Straight
05-12-2013 #7
Registered User
- Join Date
- May 2013
- Posts
- 5
What part number did you use? what size dyna techs are you using thanks again for your help.
05-13-2013 #8
New to Pro-Touring
- Join Date
- Mar 2011
- Location
- Pageland SC
- Posts
- 32
They are the 1 5/8 to 1 3/4 stepped not sure of part no. I'm out of town, I'll see if I can find it and post.
Reply With Quote
