1970 Chevelle Pro Touring Build

[David LaBuda]

Used an PCM mount out of an Astro van.


As it turns out, a Silverado cold air intake works perfectly in a Chevelle.


Testing out the headlights.


I used Aeroquip braided fuel lines. I would have liked to run hard line but there was no way to get it installed with the body on the frame.





I was finally able to get the engine started and drive out of the garage just before Thanksgiving


The center section is from Quick Performance. It has a Yukon case, tru track, and 3.89 gears. I'll need to break it in before I can get the engine dyno tuned.


Here's the formula for modern steering in a Chevelle: Grand Cherokee steering box, 97 Astro van steering shaft, and a 4th gen Camaro steering column.