Results 1 to 14 of 14
Thread: Narrow Power Steering Rack
Threaded View
-
01-28-2013 #1
Registered User
- Join Date
- Apr 2012
- Location
- Lethbridge, Alberta
- Posts
- 34
Narrow Power Steering Rack
I'm in need of some assistance finding a narrow power rack. I bought a Flatout Engineering C4 Corvette IFS that is narrowed to 57" hub to hub. The C4 rack is a high mount rack and it interferes with my engine. I can't really raise the engine, so I need to drop the rack. I've strung up the pivots and determined that 20.75" between the pivots is what I need to prevent bump steer. I'm going to have to drop the tie rod...but one problem at a time.
The rack that I bought from Flatout is made by Unisteer. I've contacted them and was told that they can't shorten it and didn't seem at all interested in helping me out. Flaming River were about the same. The current rack is 21.5" between the pivots...you'd think it could loose 3/4" without having to break the laws of physics.
I've looked up some of the custom racing units and they are all narrower...I'm out of ideas. Anyone got some advice?Volvo - Tougher than dirt.
-
Reply With Quote
