Mini Tub Rear End

[Quickboat]

I am now leaning toward a new Currie 12 bolt all other questions are the same anyone?

[Classic Nova & Performance]

Jim,
Have you decided on a brake/wheel/tire package yet? You will need to decide which rear end you are planning to use and the brake package. That way you know what your axle offsets are & the brake dimensions. You can determine what the nominal width needs to be, then factor in wheel dimensions based on what fits and what look you are after. You will need to use offset shackles with the Deep Tubs. DSE makes a rear mini-tub kit that includes everything you would need for the project.

Feel free to contact me if you have any questions or need/want any information regarding DSE or Currie components.

Walt

[Quickboat]

Walt, I am looking at the custom 12 bolt from Currie. I have 11 inch rear disc kit from a 94 T bird turbo coupe. They are bracketed for my 10 bolt but should be able to fit with mods on the new 12 bolt Currie which uses Ford 9 inch ends. I see they have this option on the website. My brakes came from SSB. I was looking into 19 inch wheels either 10 or 11 inch wide, but dont know exactly how much dish I want. I just know I want more dish in the rear.