1968 Volvo project Pure Volvocity

[68EFIvert]

Thanks for the love guys.

I was able to make some progress this weekend on a couple items. I had to remake a transmission cooler bracket. There wasn’t sufficient space to hook up the lines to it. Retry boring stuff so no pictures there.

I was able to work out my emergency brake mount. I will be using an Estopp electric setup. I mounted it to the driveshaft tunnel and routed the cables from the rear end. The big benefit to doing it now was access to the rear end. It helps not having all the sheet metal there. LOL!






I also started to fabricate a bracket to hold the Bosch ABS setup. It will be mounted behind the front drivers wheel. It will be bolted into the wheel well in two pieces. Rivnuts make the job pretty clean. I will post some pictures of that at it progresses.

I also was able to layout the brake and cooler lines. The little things are starting to come together but there is a ton of work to do before it goes in for paint.