Monroe Handler

[feeble]

Thanks for the tip David. I've got some 5/8" hardware coming for the rear that should be OK if my thinking is correct, I'll post pics when it gets here.



I've scrapped the full frame idea, I'd never get the car done if I changed it that much.

I still want to do a three link rear though as I have a lot of the purchased parts already.

To that end, I cut the spare tire well in the hatch area:



and am building this:






which should slip in from the top once I finish removing the rest of the floor out to the existing uni-body frame rails.

Should look JUST like this when it's done. ;-)



The brackets on the front of the lower links bolt-in to replace the stock Mustang II leaf spring hangers.

Assuming my CG height assumption is correct, as shown, anti-squat is 53%. If I want to drag, dropping the rear of the lower link into the bottom hole puts AS at 120%.