Monroe Handler

[feeble]

Thanks guys! Really helps to be in good company!

Weather here was great today, 60s to low 70s with a light breeze.

Part of the day was spent stripping the rear housing down, leaving the axles. Got the pinion angle roughly set for the 3 link. Leaving the leaf springs in place for now as they do a great job of holding up the car and locating the rear end right where it needs to be.

Also spent more time removing the hatch floor and portions of the structure that holds the upper shock mount. The frame rails are pristine. Still need to finish trimming yet. It looks like the frame work in the CAD shot above should slip in pretty nicely. I have to order the rectangular tubes for that yet (odd size) and get the rest of the tubes cut, holes drilled for the fuel cell mount, etc.