Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 6 of 14 FirstFirst 1 2 3 4 5 6 7 8 9 10 11 ... LastLast
    Results 101 to 120 of 268

    Hybrid View

    1. #1
      Join Date
      Sep 2009
      Posts
      3,012
      Country Flag: United States
      Quote Originally Posted by Grim View Post
      Why?


      Taking the egr off will kill the economy. EGR does not hurt performance at all. When you floor it the EGR closes giving full power. It only opens at steady cruise. It delutes the air charge and then the O2 sees it as a rich condition and leans out the fuel. Taking it off could cost you as much as 20% fuel economy.

      Great build thread. Really nice work.
      Thank you for the compliments! As for deleting the EGR, it is more for aesthetic purposes. I think that a cluttered engine bay is unsightly. I am routing all of my wires to that it hides as much as possible. And as far as fuel economy, if it really hurts me as much as you are saying I may hook it back up. There are so many people out there that have had the EGR deleted and tuned appropriately that are still getting mid 20's in mpg. I am not too concerned at this point, but might take it into consideration if it becomes a problem. I have HP tuners and can turn it on or off without costing anything but time. I didn't ruin anything when I deleted the system, so if I want it is just a matter of installing the components again and re-pinning the ecu.



      1955 Nomad project LC9, 4L80e, C5 brakes, Vision wheels
      1968 Camaro 6.2 w/ LSA, TR6060-Magnum hybrid and etc SOLD
      1976 T/A LS1 6 Speed, and etc. SOLD
      Follow me on Instagram: ryeguy2006a


    2. #2
      Join Date
      Sep 2009
      Posts
      3,012
      Country Flag: United States
      Ok, made some big progress towards my engine swap. I had my buddy come over and we stripped the front end of the car off so that today I would be able to just pull the motor out. After a few hours I was able to get the motor down and pull the body off. It is the reverse of how I have ever done engine swaps, but is actually the proper way to remove the engine from the 4th gen cars. Here are some pictures of the process.









      And the motor is gone...well from this car anyway.



      Here is the mess that will be swapped over to my car. I need to strip off all of the emissions equiptment and remove the wires from the ECU that are not necessary, such as the rear O2 sensors.











      I found this written on the bellhousing for the T-56. I think that it says Halcucca Motorsports JB Performed



      This is what I ended up with once I stipped away the wiring.





      Now that the engine is out, I need to get the engine cleaned up and figuring out my wiring right off first. I ordered some engine mounts from Dirty Dingo made for 74-81 F-body's and they should be here soon. The next thing to purchase is going to be Dynatech LSx engine swap headers. They are Ceramic coated and fit very nicely.

      That is all for now.


      1955 Nomad project LC9, 4L80e, C5 brakes, Vision wheels
      1968 Camaro 6.2 w/ LSA, TR6060-Magnum hybrid and etc SOLD
      1976 T/A LS1 6 Speed, and etc. SOLD
      Follow me on Instagram: ryeguy2006a

    3. #3
      Join Date
      May 2006
      Location
      Rhode Island
      Posts
      675
      Country Flag: United States
      I'm jealous, I'm wanting an LS more and more every day. Have fun! can't wait to see more pictures. Please post up any difficulties you have swapping this in, very interested.
      Rene P.

      My 1968 firebird build thread--->https://www.pro-touring.com/showthre...rd-on-a-budget

    4. #4
      Join Date
      Dec 2005
      Location
      Birmingham, AL
      Posts
      3,355
      Country Flag: United States
      That is the way I have seen 4th gen engine pulls. Drop the subframe from underneath. Is that a 98? Looks like it has perimeter bolt valve covers.
      BTW, I am a little jealous of the space you have in the shop.
      Stephen

    5. #5
      Join Date
      Apr 2010
      Location
      Portland, OR
      Posts
      357
      Been there and done that a few times. Actually really easy. If its a 98 I think the exhaust manifolds will work in a 2nd gen...it was either 98 or 99 that worked without modifications. That said the LS does like to breath.
      1973 Firebird 466 Pontiac, T56, C5 Brakes, PTFB and Hotchkis suspension
      2011 Camaro SS Supercharged, ZL1 body and brakes, Z28 suspension.

    6. #6
      Join Date
      Jun 2010
      Posts
      197
      Ryan, Very sweet and beautiful bird!! s. I just did a similar engine removal and doing the transplant on a 68 vert bird. One suggestion for the future removals (I swore myself I will never want to do it again lol), is to leave the rear wheels on, and put a couple tires under the rear tires, so it will swivel easily up rather than jackstands in the rear.

      One recommendation if you are planning to lower the car at all, is to go with somethng else rather than the Dynatech Musclemaxx setup. I have it on my 67 and it works great around the frame and PS box, but one thing that honestly sucks, is that it hangs way too low. For the 68 swap, I got a set of Sanderson Headers, and also found a company that sells some polishd ones for $150, however have not tried yet, but so far looks like they will need very light massaging around the PS box. Dougs LS swap headers also seem to be a better option as they are long tube\hugger style, so they will not hang too low.

      I probably missed, what color is that? Looks very clean, an very similar to the color on my 67 400.

      Good luck on the project!!

      Gui

    7. #7
      Join Date
      Sep 2009
      Posts
      3,012
      Country Flag: United States
      Quote Originally Posted by geberhard View Post
      Ryan, Very sweet and beautiful bird!! s. I just did a similar engine removal and doing the transplant on a 68 vert bird. One suggestion for the future removals (I swore myself I will never want to do it again lol), is to leave the rear wheels on, and put a couple tires under the rear tires, so it will swivel easily up rather than jackstands in the rear.

      One recommendation if you are planning to lower the car at all, is to go with somethng else rather than the Dynatech Musclemaxx setup. I have it on my 67 and it works great around the frame and PS box, but one thing that honestly sucks, is that it hangs way too low. For the 68 swap, I got a set of Sanderson Headers, and also found a company that sells some polishd ones for $150, however have not tried yet, but so far looks like they will need very light massaging around the PS box. Dougs LS swap headers also seem to be a better option as they are long tube\hugger style, so they will not hang too low.

      I probably missed, what color is that? Looks very clean, an very similar to the color on my 67 400.

      Good luck on the project!!

      Gui
      Thanks for the tips, I am still researching what headers I will be using.

      And the color is Dark Shadow Gray, it is a Ford Color.


      1955 Nomad project LC9, 4L80e, C5 brakes, Vision wheels
      1968 Camaro 6.2 w/ LSA, TR6060-Magnum hybrid and etc SOLD
      1976 T/A LS1 6 Speed, and etc. SOLD
      Follow me on Instagram: ryeguy2006a

    8. #8
      Join Date
      Oct 2011
      Location
      Florida
      Posts
      51
      Nice looking ride. That's a lot of work in a short time.
      1973 Camaro, Full Resto, QA shocks, LT1 ENGINE W/6 SPEED, Slow transformation to Pro touring status.

    9. #9
      Join Date
      Sep 2009
      Posts
      3,012
      Country Flag: United States
      Got a little cleaning up done around my garage and the motor and trans. I also got some of my swap parts ready to install into my car. Here are the Dirty Dingo engine mounts, DSE hydraulic clutch bracket and a new Hurst shifter knob.







      Here are some before and after pictures of the engine clean up.





      And after a little Purple Power.







      Not a bunch of updates, but I was busy parting out the Camaro, and didn't have a ton of time for the TA.

      All for this weekend.


      1955 Nomad project LC9, 4L80e, C5 brakes, Vision wheels
      1968 Camaro 6.2 w/ LSA, TR6060-Magnum hybrid and etc SOLD
      1976 T/A LS1 6 Speed, and etc. SOLD
      Follow me on Instagram: ryeguy2006a

    10. #10
      Join Date
      Sep 2009
      Posts
      3,012
      Country Flag: United States
      I got my motor and transmission in for a first test fit. Overall I was very happy with the fitment. I will have to take the motor in and out a few more times, but it fits really great for a first test. Here are some pictures.

      Here is a picture of the Dirty Dingo engine mounts. They fit great and they are a very great company to work with. I ended up buying the wrong engine mounts, and needed to exchange them for the right ones. They were great and I was able to ship mine to them and get the new ones in less than a week. Excuse the oil on the engine.



      Here is one of many times the motor will be on the engine hoist, but this is the first test fit.



      And here it is in with the Corvette Fuel Rail Covers. I like what I am seeing. And for those of you that may ask, the motor is tilted towards the rear because the shifter won't fit into the interior...yet. So for now it is tilted towards down in the rear.







      Here are some pictures of the ground clearance.





      Now, the big debate I have been having is which headers to buy. But since I had the engine in there, I thought why not check and see how the stock manifolds will fit. And to my surprise they fit great! I have at least a fingers width around everything. So, for now I am just going to use the stock manifolds and save some money.









      And now it was time to see if we can get that shifter into the car, so I got out the sawzall and started cutting a little at a time. And I ended up with this.



      I know that the cuts aren't that clean, but I will make some panels and weld them in to make it look good. The reason that I cut through the factory 4 speed hump is because it was already shot. You can't see it, but before I ever got the car someone tried to change the shifter and decided to crudely cut a hole in the side of the hump. So, for now I am just cutting it up, and will probably drill out the spot welds and patch in a new panel.



      Now, a test fit of the console. Another surprise to me is that the shifter is very close to the stock location. Not sure what an auto console will fit like, but I may end up making an adapter for the shifter to have it come out in the factory 4 speed location.



      As you can see it is only about 2-3 inches back from the stock location.



      That is all for now. Won't be long and I will be uploading a video of the first start up!

      Ryan


      1955 Nomad project LC9, 4L80e, C5 brakes, Vision wheels
      1968 Camaro 6.2 w/ LSA, TR6060-Magnum hybrid and etc SOLD
      1976 T/A LS1 6 Speed, and etc. SOLD
      Follow me on Instagram: ryeguy2006a

    11. #11
      Join Date
      Sep 2009
      Posts
      3,012
      Country Flag: United States
      I got all of this from a company called Waytek, and they specialize in wiring, and since it is a bulk company you can get some tremendous deals. I highly recommend the company. If you look I got two spools of wiring. I bought one red and one black 18 gauge automotive grade wiring reels 250 ft. for 18 each!! That is cheap. I also got a Bussmann fuse/relay box that is sealed and uses micro relays and micro blade style fuses. I also bought all of the necessary pieces to wire it up.





      I also bought a brand new in the box Baer adjustable proportioning valve for my LS1 rear disk swap. That is the final piece that I needed. Now, I just need to actually do the swap!



      That is all for today, but I should have some pictures from tomorrow of the first test fit of my new Engine!! I have to pick up my motor mounts from the post office first thing tomorrow and while the wife is away at an event I will be busy trying to get my engine in.

      Cheers,
      Ryan


      1955 Nomad project LC9, 4L80e, C5 brakes, Vision wheels
      1968 Camaro 6.2 w/ LSA, TR6060-Magnum hybrid and etc SOLD
      1976 T/A LS1 6 Speed, and etc. SOLD
      Follow me on Instagram: ryeguy2006a

    12. #12
      Join Date
      Mar 2010
      Location
      Valencia, CA
      Posts
      99
      Country Flag: United States
      Ryan,
      Nice work so far- at least now you can keep your 76 TA and not sell it. You put alot of good, hard work into it.

      Geno

    13. #13
      Join Date
      Sep 2009
      Posts
      3,012
      Country Flag: United States
      Quote Originally Posted by 72blackbird View Post
      Ryan,
      Nice work so far- at least now you can keep your 76 TA and not sell it. You put a lot of good, hard work into it.

      Geno
      Geno, I have put a lot of work into the car, and I never really wanted to sell. But I had other obligations in my life. But, I rethought my decision and decided to try and put my 400/4 speed out for sale and just do the LSx swap that I really wanted. I came across this deal and couldn't pass it up. I can't wait to get the motor in and running!


      1955 Nomad project LC9, 4L80e, C5 brakes, Vision wheels
      1968 Camaro 6.2 w/ LSA, TR6060-Magnum hybrid and etc SOLD
      1976 T/A LS1 6 Speed, and etc. SOLD
      Follow me on Instagram: ryeguy2006a

    14. #14
      Join Date
      Feb 2005
      Location
      Sydney, Australia
      Posts
      1,797
      Country Flag: Australia
      Nice work, mate.
      So, the slots in the engine brackets????/ So you can adjust the fore/aft setting of the engine, I assume?
      Regards,
      Leigh

      Sydney, Australia
      1971 Firebird 455

      https://www.pro-touring.com/showthre...Project/page27

    15. #15
      Join Date
      Sep 2009
      Posts
      3,012
      Country Flag: United States
      Quote Originally Posted by LeighP View Post
      Nice work, mate.
      So, the slots in the engine brackets????/ So you can adjust the fore/aft setting of the engine, I assume?
      Leigh, you are exactly right, the brackets are adjustable to allow for the perfect placement of the motor. They are made by Dirty Dingo Motorsports, and they are a great company to work with.


      1955 Nomad project LC9, 4L80e, C5 brakes, Vision wheels
      1968 Camaro 6.2 w/ LSA, TR6060-Magnum hybrid and etc SOLD
      1976 T/A LS1 6 Speed, and etc. SOLD
      Follow me on Instagram: ryeguy2006a

    16. #16
      Join Date
      Apr 2010
      Location
      Portland, OR
      Posts
      357
      Nice work man!!! Moving right along! So just in case I ever do this what year are those exhaust manifolds that seem to fit with no problems?

      Crazy how for this car has come......
      1973 Firebird 466 Pontiac, T56, C5 Brakes, PTFB and Hotchkis suspension
      2011 Camaro SS Supercharged, ZL1 body and brakes, Z28 suspension.

    17. #17
      Join Date
      Jul 2006
      Location
      Hackettstown, NJ
      Posts
      1,026
      for your shifter handle mod, look at viper and kit car cobra shifters for ideas. none will work for you build, but give you ideas on how/ what can be done and still be functional.

    18. #18
      Join Date
      Sep 2009
      Posts
      3,012
      Country Flag: United States
      Larry, I am still up in the air on what I am going to do. I am probably just going to buy an auto console and run the shifter in the position that it is currently in. I did look into making a remote shifter, but not sure I like the idea.


      1955 Nomad project LC9, 4L80e, C5 brakes, Vision wheels
      1968 Camaro 6.2 w/ LSA, TR6060-Magnum hybrid and etc SOLD
      1976 T/A LS1 6 Speed, and etc. SOLD
      Follow me on Instagram: ryeguy2006a

    19. #19
      Join Date
      Apr 2010
      Location
      Portland, OR
      Posts
      357
      While its only my opinion I have the T56 shifter with the auto console placement and it seems perfect.
      1973 Firebird 466 Pontiac, T56, C5 Brakes, PTFB and Hotchkis suspension
      2011 Camaro SS Supercharged, ZL1 body and brakes, Z28 suspension.

    20. #20
      Join Date
      Sep 2009
      Posts
      3,012
      Country Flag: United States
      I did like the position of the shifter more with the shifter located 5-6 inches rearward. I will probably end up getting the auto console.


      1955 Nomad project LC9, 4L80e, C5 brakes, Vision wheels
      1968 Camaro 6.2 w/ LSA, TR6060-Magnum hybrid and etc SOLD
      1976 T/A LS1 6 Speed, and etc. SOLD
      Follow me on Instagram: ryeguy2006a

    Page 6 of 14 FirstFirst 1 2 3 4 5 6 7 8 9 10 11 ... LastLast



    Advertise on Pro-Touring.com