Ridetech G Body Rear Coilover Install

[SicMonte]

I have a 87 Grand National.
i just recieved all my Ride Tech Level II coil over kit. Front sway bar.
i went with Detroit Speed rear upper and lower control arms and rear sway bar.
Also their front brace kit.



Right now i have some 20X8.5 -19 offset Foose Nitrious rims on the car.
do you think i will have major rub issues when i install all of this?
my front tires rub when i hit big bumps now. I have a 1/2 spacer under front springs now too in order to relieve some of the runbing.
Im going to order new rims over the winter. Better pro touring rims.
I just want to be sure i can drive home from shop after coil over kit is all installed.
Thanks Rich

The coilover kit is designed to lower the car about 2" if I remember correctly but can be adjusted lower. I am running Fronts 18x9 4.75"bs, 275/35/18 tire
Rears 18x10.5 6"bs, 295/35/18 tire. The front will rub on an off camber turn but that's about it.

[Kiko]

The coilover kit is designed to lower the car about 2" if I remember correctly but can be adjusted lower. I am running Fronts 18x9 4.75"bs, 275/35/18 tire
Rears 18x10.5 6"bs, 295/35/18 tire. The front will rub on an off camber turn but that's about it.

Did you roll your fenders to fit those wheels/tires (front? rear?)? Why I'm asking it's because I'm running 18x9, 275/35/18 in the back of my 83 Grand Prix and the tire is about 1/4" from the frame.