Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 1 of 2 1 2 LastLast
    Results 1 to 20 of 23

    Hybrid View

    1. #1
      Join Date
      Apr 2009
      Posts
      337

      The Gear Head House plan

      Three car garage, Highbay garage, Extra workshop, and a two bedroom living space on the second floor...I'm speechless.



      Name:  arv43254.jpg
Views: 3287
Size:  29.3 KB

      Name:  arv43254-left.JPG
Views: 2388
Size:  23.1 KB

      Name:  garage.JPG
Views: 5078
Size:  33.5 KB

      Name:  garage-2.jpg
Views: 2278
Size:  21.1 KB

      2nd story living space.


      Name:  lr-2.JPG
Views: 1948
Size:  73.1 KB


      Name:  kitchen.jpg
Views: 1900
Size:  26.5 KB

      Name:  br.JPG
Views: 1864
Size:  13.6 KB

      Name:  bath.JPG
Views: 1938
Size:  16.2 KB

      etc.

      Feel free to throw up some others. Would be cool to keep it in the lower six figure range, away from the unobtanium.
      You can't be slick to a can of oil


    2. #2
      Join Date
      Mar 2005
      Location
      St George Utah
      Posts
      1,243
      Country Flag: United States
      you need 2 dishwashers!! one for dirty and one for clean then you never have to put them away. out of the clean use ti and into the dirty. think of all the extra cabinate space you will have for Kraft Dinner
      Blake Foster
      www.speedtechperformance.com
      435-628-4300
      St. George Utah.
      it's always sunny here.

    3. #3
      Join Date
      Dec 2004
      Location
      Abbotsford, BC
      Posts
      359
      Country Flag: Canada
      Quote Originally Posted by killer69 View Post
      you need 2 dishwashers!! one for dirty and one for clean then you never have to put them away. out of the clean use ti and into the dirty. think of all the extra cabinate space you will have for Kraft Dinner
      That is bloody brilliant.

      Too bad that shop/house above didn't spend the extra $$ on some decent trusses instead of having all those steel posts everywhere.

    4. #4
      Join Date
      Dec 2009
      Location
      Carson City, NV
      Posts
      861
      Country Flag: United States
      Nice, I live in a industrial building with living quarters upstairs. but nowhere near as nice as this. I have a two bay shop and paint-booth. and my living space is only about 900 sq ft with a tiny kitchen. but i suffer through it... I would love to upgrade to something like this...

    5. #5
      Join Date
      Oct 2004
      Location
      St.Anne Il
      Posts
      3,924
      Country Flag: United States
      thats all i would ever need..maybe a extra oven for powder coating..
      Darrin Stalnecker
      1969 Camaro Convert full pt pr
      2007 Corvette Supercharged
      1968 Camaro LS1 T56
      http://www.fquick.com/dropit69

    6. #6
      Join Date
      Sep 2007
      Location
      Ventura, ca
      Posts
      763
      Country Flag: United States
      Droooooooool! That looks like a perfect house for me!
      I am not useless, I can still be used as a bad example!


      -Bob

    7. #7
      Join Date
      Dec 2006
      Location
      oshawa ontario
      Posts
      1,607
      Country Flag: Canada
      OMG with all the smells of exhaust, paint fumes, smoke, thinners , grinding discs and about a half dozen other things I couldnt imagine living above my shop.
      Nascar 69 Chevelle project, 1999 Hutch Pagan Nascar chassis, 69 Chevelle body,700hp, Penske's, slicks, roadrace track day https://www.pro-touring.com/showthre...le-Cup-project
      89 Iroc 406 Fitech 5 spd
      01 chevy 2500HD 4x4 8.1 Allison
      31 Scarab 2 x 454

    8. #8
      Join Date
      Nov 2011
      Location
      charlotte nc
      Posts
      110
      Quote Originally Posted by shortrack View Post
      OMG with all the smells of exhaust, paint fumes, smoke, thinners , grinding discs and about a half dozen other things I couldnt imagine living above my shop.
      you'll need a detached paint booth lol
      JohnnyCichowski.com <- ls1 miata build, race results, product reviews, yada yada yada...

    9. #9
      Join Date
      Apr 2009
      Location
      san diego
      Posts
      5,101
      Country Flag: United States
      That is freaking awesome!

    10. #10
      Join Date
      Apr 2005
      Location
      USA
      Posts
      4,462
      Country Flag: United States
      I'd do it ..
      Use some good exhaust fans ..
      Jeff Tate
      U.S.A.
      "The best thing about participating in these events is that you get to hang out with a group of intelligent like minded people who live to achieve things in their lives. You won't find a lazy, mean, or dumb bone in their bodies." Bret Voelkel, RideTech

    11. #11
      Join Date
      Apr 2001
      Location
      The City of Fountains
      Posts
      16,129
      Country Flag: United States
      Anyone in the building trades want to give an approximation as to what something like that might cost to build given moderate choices in material, etc...Ballpark...?

      Andrew
      1970 GTO Version 3.0
      1967 Cougar build
      GM High-Tech Performance feature
      My YouTube Channel Please Subscribe!
      Instagram @dr__efi
      I deliver what EFI promises.
      Remote Holley EFI tuning.
      Please get in touch if I can be of service.

      "You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her

    12. #12
      Join Date
      Nov 2011
      Location
      charlotte nc
      Posts
      110
      i used to work for a general contractor, but I'm a fairly decent land developer. not that that's a valuable skill any more.

      at a quick glance that place would be seriously cheap to build. i say under 200k. the expensive part would be filling it full of tools, lifts, air ect... the other hard part would be having the wife say OK, or (for the single guy) getting a girl to move in. also resale would be a pain. you have a nich market of gear heads that would buy it and that's about it.


      http://www.thehousedesigners.com/plan/kipling-8306/ here are some floor plans of a similar garage house. this would cost roughly $207k to build
      JohnnyCichowski.com <- ls1 miata build, race results, product reviews, yada yada yada...

    13. #13
      Join Date
      Mar 2009
      Location
      San Antonio, TX
      Posts
      1,635
      What a sweet setup. All I could do would be wrap/pad those poles, and be happy as a clam.
      Many houses we have seen have 'mother in-law' suites, this would be a garage-condo... lol
      It looks like 2 bdrm, 1 bath, 4+1 car garage
      Dave
      84 Monte SS - just a few bolt-ons

    14. #14
      Join Date
      Apr 2001
      Location
      The City of Fountains
      Posts
      16,129
      Country Flag: United States
      I think the trick for resale would be to find a desirable piece of land that could sustain a large home with one of these garages, as a carriage house, on the side. Personally, I don't need a big house and one of these will do, but when I am ready to sell, the property can be positioned to sell with the intent of a bigger home being built next to the garage.

      Andrew
      Last edited by andrewb70; 12-21-2011 at 11:29 AM.
      1970 GTO Version 3.0
      1967 Cougar build
      GM High-Tech Performance feature
      My YouTube Channel Please Subscribe!
      Instagram @dr__efi
      I deliver what EFI promises.
      Remote Holley EFI tuning.
      Please get in touch if I can be of service.

      "You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her

    15. #15
      Join Date
      Apr 2009
      Posts
      337
      Good angle Andrew. Depending on the area, and strength of it's car culture. It could be a selling point.
      You can't be slick to a can of oil

    16. #16
      Join Date
      Sep 2005
      Location
      Woodstock, Ga
      Posts
      695
      Country Flag: United States
      Very cool.
      When I was a designer in an engineering dept of a lumber supply company I saw several designs for similar setups. Came up with some cool ones for my self in my spare time too. I was looking at a killer cheap price to build, especially with designing it with me construction it in mind. Basically a clear span floor truss and a truss roof and more of a full wall second floor. That way the weight on the floor is minimal(no roof loads) and the garage can be post free and deeper, just have to be aware of torsion wall requirements depending on your area codes, but a central stair could take car of that. You can also find kits a little smaller than that.

      Robert

    17. #17
      Join Date
      Mar 2008
      Posts
      952
      i know a guy that built something similar, but he started by building a large pole shed with 20 foot sidewalls. the living area had 5 bedrooms and 3 baths and only took up about a third of the total floor space..
      he was a concrete contractor at the time, and he did a lot of labor trading and built everything for just over $100k out of pocket, with most of that being ate up by the septic and well and geothermal hot water heat/AC setup.. it only took him a couple of years to do, and he even had the living area set up with polished stainless stair rails and a "fireman's pole" that just happened to come down from the upper level into the middle of the living room, with a disco ball right next to it..

    18. #18
      Join Date
      May 2009
      Location
      silver spring md
      Posts
      40
      i want one...
      Determination is key

    19. #19
      Join Date
      Feb 2005
      Location
      Sydney, Australia
      Posts
      1,797
      Country Flag: Australia
      That place would be perfect for me....if I wasn't married.....
      Regards,
      Leigh

      Sydney, Australia
      1971 Firebird 455

      https://www.pro-touring.com/showthre...Project/page27

    20. #20
      Join Date
      Jun 2010
      Location
      meriden. kansas
      Posts
      108
      Country Flag: United States
      Well i think i will be pitching that idea to my wife very soon, looks perfect to me.
      Matt Ditch, 1968 Camaro, Hotchkis Springs, CCP sway bar, Global West control arm bushings, 5.3 with TH400, Boss 338

    Page 1 of 2 1 2 LastLast



    Advertise on Pro-Touring.com