Hey guys so first I have a correction, there is no spacer between intake and carb (it's a tall deck intake). Secondly, I got the car nice and hot and while idling took note of the fuel levels in the carb bowls. I let it sit for about 15 mins and then looked again, looked the same. Then I tried to start and it did not start, I tried the full throttle test and that didn't work as well. Basically I cranked on it for close to an hour until it finally started. Does the bowl levels in the carb have to be the same front and rear? On mine the front bowl is about 3/4, while the rear is about 1/4 full up the sight glass. Any suggestions guys? Also any suggestions on local tuning shop in Marlboro, NJ? Thanks!