Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 11 of 11

    Threaded View

    1. #4
      Join Date
      Nov 2006
      Location
      NH
      Posts
      269
      Country Flag: United States
      Warm the car up and take note of your front & rear float level while idlng.

      Before you do your restart after operating look in the sight glasses and see where the float level is.

      It's possible the bowls are leaking down either inside the carb or outside onto your intake.

      Plus throttle blade position should be even front & rear so you'll need to take the carb off and flip it over to check blade position.

      Mix screws should also be even in all 4-corners.



      How many turns out are you?

      Where's your initinal & total timming at?
      SHAKER TUNED SOLUTIONS





    Advertise on Pro-Touring.com