
Originally Posted by
Probird
I have a question, what is it about the True Turn that allows the larger tire size? Why can't you run a 275 on a stock subframe? What components get in the way with a stock spindle and steering arm? I'm curious because I'm building a 70 Nova right now. I have almost completed the fabrication work on the rear suspension, mini-tubbed and built a 3-link. It's almost time to move to the front and would like to get as much information as I can before hand, as well as figure out what I want to do with the front. I personally really like the drop spindles and add the taller version into the equation and it's a win, win situation IMO. I have considered doing the G-mod with a 1/2" taller ball joint instead. My previous experience with my 68 firechicken which was slammed by lowering springs that had been cut even further had tons of suspension problems. Like I would wipeout ball joints pretty consistently and I figured it was from being to low and the angle of the A-arms with relation to the ball joint to spindle angle. Pardon my wording of thing, but I really want to avoid those problems and the taller drop spindle is just the ticket.