Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 8 of 8
    1. #1
      Join Date
      Aug 2004
      Location
      Texas
      Posts
      327
      Country Flag: United States

      Buckets for 56 Panel

      Well not Pro-Touring but certainly Pro-Cruising. I'd like to use 4 matching buckets - there is the standard Suburban seats but it would also be nice if the rear seats would swivel - am I out of luck except maybe for some RV type Captain seats? Looking for suggestions - I know many of you guys out there are much more knowledgeable and up to date on what might be available. Thanks. -Bob
      -Bob (66 Nova)

    2. #2
      Join Date
      Apr 2005
      Location
      Cartersville, GA
      Posts
      1,298
      Country Flag: United States
      Some of the '73-'77 A-bodies came with swivel buckets...they look Captain's Chair-ish, but don't sit so high. If you're not concerned about lateral support, and don't mind older seats, 2 sets of '63-'64 Impala buckets would work well, or if you want someting a little smaller with a similar look, use Corvair seats. Unless you are going for a vintage look, though, I'd probably use bucket seats from a later luxury 2 door (since the backs fold down), like possibly a late 90s Buick Riviera, or an Eldorado.
      Joe Hinds

    3. #3
      Join Date
      May 2011
      Location
      central Pa, USA
      Posts
      189
      Country Flag: United States
      perhaps just take buckets you like and set them on a swivel base?
      Tom

      trailers are for boats and broke stuff.

    4. #4
      Join Date
      Aug 2004
      Location
      Texas
      Posts
      327
      Country Flag: United States
      Joe - weren't some of those called Strato buckets? Little concerned the Corvair seats might get swallowed up in that Panel and not look right. I'll search and see how the others might look in there but they may be a lot harder to find. Tom - good thought, not sure how well I could pull that off.
      Maybe I'll just stick to something later model and "over-stuffed" for comfort
      -Bob (66 Nova)

    5. #5
      Join Date
      Nov 2006
      Location
      Ma.
      Posts
      5,560
      Country Flag: United States
      74 MontyCarlo had swivel seats.
      Wayne
      Car FINALLY home !!!!!! lol
      Project FNQUIK https://www.pro-touring.com/showthre...ghlight=FNQUIK

    6. #6
      Join Date
      Apr 2010
      Location
      Jersey Shore
      Posts
      695
      Country Flag: United States
      The 64 Impala seats look really good in 50's cars IMO. Not much lateral support, but great for a pro-cruiser!


      -Chris
      '69 Corvette
      '55 Chevy Hardtop
      AutoWorks Middletown, NJ
      @autoworksnj for corvette and shop car pics
      https://www.pro-touring.com/showthre...e-Build-Thread


    7. #7
      Join Date
      Aug 2004
      Location
      Texas
      Posts
      327
      Country Flag: United States
      Those Impala seats do look good - I may have to consider them for my 55 Post Bel Air - would you have any pics with the door open? I'll probably build a center console but will run a column shift. What about something late-model - anything that stands out whether they swivel or not? One nice thing about late-model seats is the integral seat belt but I don't think that's a must - I think there are plenty of places to mount conventional 3-point seat belts.
      Here is an old pic of the Panel:
      -Bob (66 Nova)

    8. #8
      Join Date
      Apr 2010
      Location
      Jersey Shore
      Posts
      695
      Country Flag: United States
      I dont have any great pics with the door open but heres an old one to hold you over... I can snap a better one next time I take the car out if you want


      Ive seen Silverado seats without the headrest in a big 50's truck that looked pretty good. Integral seatbelt too.
      -Chris
      '69 Corvette
      '55 Chevy Hardtop
      AutoWorks Middletown, NJ
      @autoworksnj for corvette and shop car pics
      https://www.pro-touring.com/showthre...e-Build-Thread




    Advertise on Pro-Touring.com