Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 54

    Thread: Video?

    Hybrid View

    1. #1
      Join Date
      Aug 2008
      Location
      Pgh, PA
      Posts
      2,177
      Quote Originally Posted by Bow Tie 67 View Post
      Bill,



      I installed an oil cooler and accusump 3 winters ago. The inaugural Motorstate event changed my build drastically. Back then the Mobil 1 I was running thinned out big time. I believe my oil system is up to par, its the cooling system that allowed the engine temp to exceed normal racing parameters. When tracking a car an oil cooler and temp gauge are a must!!

      Matt
      Matt, you're right. I have an oil temp gauge in my dash, but was hoping to avoid an oil cooler. Motor State had me concerned, though the oil never really got unreasonably hot - assuming I'd change oil after the event anyway. Heidts absolutely convinced me that I need a cooler. The fact that my block is bottom filled to the freeze plugs creates a real oil temp concern. But, it's all a trade-off. I have to essentially fabricate a fixture for my block that can route the lines up and forward without conflicting with the headers, firewall or inner fender. Then I need to change my oil filter setup from the frame rail to forward, then install a couple bulkhead fittings, and figure out how/where to mount the cooler. I also need to determine -10 or -12 lines select the right cooler, and then watch oil pressure to hope that I don't need to put a different oil pump in. Isn't this stuff fun?
      '66 GTO Vert Project "Red Ink", 462ci of stroked pontiac power, TKO600, SC&C Stg II+, Tubular lowers, Currectrac Rear suspension, Moser 12bolt w/Truetrack, Wilwood Master and discs all around, too much fun for words...





    Advertise on Pro-Touring.com