Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 3 of 3

    Threaded View

    1. #3
      Join Date
      Jul 2006
      Location
      Pensacola, FL
      Posts
      1,265
      Country Flag: United States
      To make 500 to the wheels is a bit different than 500hp at the crank. Not too difficult to make 500hp on a 6.0 truck motor, as link above shows. I would think you'd need to make close to 600hp to put 500 to the wheels. Probably very good set of heads & decent size cam. Supercharger would be the best option in my opinion, keep it much more streetable. Rick's tanks should have a tank that would work. I'm not familiar with how much room there is in motor mount/frame area on a 50 pickup, but it would seem like you could use the truck acc, + the stock ecm & harness. I have no clue on the rad, might to to make one work. Shouldn't be too hard. Like to see pics of this build. Scott




    Advertise on Pro-Touring.com