Results 1 to 12 of 12
Thread: quarter patch panel
Hybrid View
-
06-18-2005 #1
Banned
- Join Date
- Aug 2003
- Location
- Orlando, FL
- Posts
- 8,745
If you can get away with it, I would use as little as possible below the trunk extension. But it really looks like you have damage well above that trunk filler. I would go about an inch below the body line. Gives you a reasonably firm area to work since the break line is right there, while not jepordizing the body line by trying to butt it or go over it. I would also stop it a inch short of the jamb.
As far as braze, other then the factory, or old timers, braze is hard to get filler to stick to. it has a tendancy to bubble later.
-





Reply With Quote



