Results 1 to 8 of 8
Hybrid View
-
02-19-2011 #1
Registered User
- Join Date
- Jul 2005
- Location
- Eastern Virginia
- Posts
- 3,964
EFI Connection makes a setup to run an LS based PCM on an LT1, TPI or Ramjet style fuel injection. All are Chevy engines, so I can'[t say if it will work on anything other than that.
http://www.eficonnection.com/eficonnection/58x.aspx
http://www.youtube.com/watch?v=5tb-s...layer_embedded
Scot
86 Monte SS
-
02-19-2011 #2
Registered User
- Join Date
- Mar 2007
- Location
- Mission Viejo, CA
- Posts
- 631
Yes, I was referring to the trigger wheel. I already have a 36-1 wheel available to me. The oil pump will be driven by a custom machined distributor shaft. As for the other components, I want to run as many factory GM parts as possible. While I see you are running Megasquirt, that is not something I want to run. Looking to keep it as close to what GM is using as possible in order to be allowed to use the available tuning of HP Tuners, EFI Live, etc., and to be tuned by any knowlegable tuning shop as an LS would.
1973 Hurst Edition Pontiac Grand Am: 430 CI of ERL built LS7, Tremec Magnum T-56 6-speed, Global West / Speedtech Suspension, Custom rear coil-over suspension, QA1 double adjustable shocks, Wilwood 6/4 piston disc brakes, Modulare C1 19" concave wheels. Shooting for 625 HP and 20 MPG!
02-19-2011 #3
Registered User
- Join Date
- Jun 2005
- Location
- Lynnwood Wa.
- Posts
- 248
MegaSquirt uses all GM sensors by default.
Oliver Shultz
It's OK to giggle and snicker. don't laugh and point
Reply With Quote
