Results 1 to 7 of 7
-
02-13-2011 #1
Registered User
- Join Date
- Jun 2006
- Location
- Katy,TX
- Posts
- 1,678
Throttle bodies with TH 350, 200R stud placement
OK guys in looking at alot of pictures of aftermarket throttle bodies for EFI on a single plane intake I see none that have an area below the shaft to locate a stud for a TH 350 kick down or 200R cable. Unless you use a Holley TBI unit and pull off the injector pods.
-
02-14-2011 #2
Registered User
- Join Date
- Jun 2005
- Location
- Lynnwood Wa.
- Posts
- 248
Hi, Skip
Found this set up on E-bay.
Chevy, Olds Throttle Cable springs 350 kick down kit.
Item number 310295668205
E-bay seller autowarehouse(4428)
OllieOliver Shultz
It's OK to giggle and snicker. don't laugh and point
02-14-2011 #3
Registered User
- Join Date
- Jun 2006
- Location
- Katy,TX
- Posts
- 1,678
Thanks but I think the issue is where to add on the stud for that or the factory type cable to hook on.
02-14-2011 #4
Starting The Transformation
- Join Date
- May 2005
- Posts
- 140
Skip Fix,
Had a look at Summit, looks like this Holley TB would work:
http://www.summitracing.com/parts/HLY-112-577/
John
02-15-2011 #5
Registered User
- Join Date
- Jun 2006
- Location
- Katy,TX
- Posts
- 1,678
Thanks John that one looks good for what I would need. I do have a TBI TB from Holley that ha a similar linkage but would not look near as clean.
02-15-2011 #6
Registered User
- Join Date
- Oct 2006
- Location
- NJ
- Posts
- 90
Correct...all the new Holley TB's have the stamped style steel linkage to make conversion much simpler. Old style was billet (looked great but very bulky)
Dennis
Moore Racecraft
02-23-2011 #7
Registered User
- Join Date
- Jan 2010
- Location
- Houston,TX
- Posts
- 42
What about mono blade throttle bodies, any have hookups for 200-4r cable?
"The only ship that won't sail, a partnership!"
Reply With Quote
