Results 1 to 7 of 7
Threaded View
-
02-19-2011 #7
Registered User
- Join Date
- Oct 2006
- Location
- Carlsbad, CA
- Posts
- 744
Aeromotive parts arrived yesterday including a fuel pressure gauge to run at the rails. Found the 90 degree fittings that I needed for the tank - XRP 90degree with male swivel 1/4" NPT on one end and AN-6 on the other. Profile of the fitting should fit in the tight confines between recess on top of the fuel tank and trunk floor.
Last edited by Gandalf; 02-20-2011 at 11:03 AM.
-
Reply With Quote
