Results 1 to 9 of 9
Thread: Electric Fan Option
-
02-10-2011 #1
Registered User
- Join Date
- Jul 2009
- Location
- New Jersey
- Posts
- 536
Electric Fan Option
Was planning on running the Mark IV but I dont have the room. So I have one that will now act as a paperweight and need something that is comparable in CFM but thinner. Any suggestions, or places I can go to see a bunch of physical dimensions?
RJ Cilurso
67 Camaro with a few things bolted to it
12 Camaro with a few things bolted to it
50 Chevy 5 window p/u with a few things unbolted
USAF
-
02-10-2011 #2
Registered User
- Join Date
- Mar 2010
- Posts
- 28
http://stores.ebay.com/AEON-IMPORTS/...=p4634.c0.m322
I used a dual fan from Ford Windstar .
02-10-2011 #3
Registered User
- Join Date
- Feb 2009
- Location
- muggy midwest
- Posts
- 533
Is this for your 67? Why won't it fit?
"...if at first you don't succeed, try again.
If you still don't succeed, then quit-no sense being a damn fool about it..."
-W.C. Fields
HARNESSWORX
(formerly gmachinz)
02-11-2011 #4
Registered User
- Join Date
- Jul 2009
- Location
- New Jersey
- Posts
- 536
BB, long WP, serpentine belt system, really cool pullies I don't want to lose. There isn't enough clearance between the nose of the WP pulley and the rad. and... I just realized this is in heating and AC. Doah!
RJ Cilurso
67 Camaro with a few things bolted to it
12 Camaro with a few things bolted to it
50 Chevy 5 window p/u with a few things unbolted
USAF
02-11-2011 #5
Registered User
- Join Date
- Dec 2002
- Location
- Philadelphia/New Jersey
- Posts
- 111
I am using a taurus fan with two speeds.It is thinner than the lincoln fan and it can also be trimmed up some.
I am running a 475BB with long water pump and GM serp.setup I made fit.
02-12-2011 #6
Registered User
- Join Date
- Jul 2009
- Location
- New Jersey
- Posts
- 536
S Jersey? Where at I'm in Berlin.
RJ Cilurso
67 Camaro with a few things bolted to it
12 Camaro with a few things bolted to it
50 Chevy 5 window p/u with a few things unbolted
USAF
02-12-2011 #7
Registered User
- Join Date
- Dec 2002
- Location
- Philadelphia/New Jersey
- Posts
- 111
Turnersville!!!!
02-13-2011 #8
Registered User
- Join Date
- Jan 2006
- Location
- Cornettsville, ky
- Posts
- 897
ls1 or lt1 fans?
02-17-2011 #9
Registered User
- Join Date
- Mar 2009
- Location
- Houston, TX
- Posts
- 1,197
Have you tried turning the fan upside down? I had to turn it upside down to make it fit. It's a tight fit. I have a Pontiac 400 with long wp.
TuTu Ho
Firebird V2-LS swap
Reply With Quote
