2nd Chance Camaro - Let the Project Begin

[syborg tt]

Getting Closer to the final version here.









It's hard to see the bracket but it's there is you look really close

[syborg tt]

I need to install the Anvil Inner fenders to make sure the vintage air lines wouldn't be in the way of the battery cables.






Yep, they are.



I forgot who suggest this but I did ground the radiator



Working on the last Vintage Air line.



I hope this is the last fitting I buy.





I need to install a small strip of cork behind this as it bounces off the core support while I am driving.







All better



Remember these as I will be using these later in the build.





Since I don't like metal on metal I purchased this Bib Gaskets.

[syborg tt]

The bend looks perfect



I originally made the fuel vent bracket using some cheap thin steel.



Test fitting to make sure it works.







Just a little bit more.



Comparing it to the mock up.









Final piece with thicker metal