2nd Chance Camaro - Let the Project Begin

[syborg tt]

So totally not necessary but I did it and it looks really nice as it made the lines disappear.







He's almost full grown.







While I cleaning up the lines I noticed the passenger side line was really close to the trans coolant lines. So added a couple washers under the bracket to raise the line up.







I finally received the black dipsticks from Lokar. So I figured I would install them while I was here.









Trans Dipstick.

[syborg tt]

I have been going back and fourth on this for weeks if not months. Do I have Mario paint the Radiator, Fan Shroud and A/C Condenser or leave it natural for this version of the car.





Today I am going back and touch up all of the holes I drilled in things. No reason to let things start rusting.








I am also removing the blue tape on the frame for the last time.





So I learned this trick when I was still in High School. My buddy's father put grease on the core support body mount to stop the creaking that old cars made and still make.








It's hard to tell what I am doing here but this was the only way I could get the washer on the Core Support upright brackets.












It's hard to believe I used all of these tools to install three bolts.