2nd Chance Camaro - Let the Project Begin

[syborg tt]

2nd Chance Camaro - Ride Tech Coil Over Rear Suspension Part I

2012 04-15 Update - Ride Tech Coil Over Rear Suspension Part I
www.2ndchancecamaro.com

Good Morning all,

For the rear suspension I upgraded to the Ride-Tech Coil Over set up. However we've added a few new
parts that Ride-Tech offers. First is there offset lower link bar and offset spring mount which gives you an
extra 3/4" of tire room. There will be plenty of room to fit the BFG 295 (12.5" wide) and most 315's.





There new Coil overs - what else do I need to say.



Very Simple Install.



Okay Plan B
Yes I am changing things just a little. I am going to remove the factory spring perch and install Ride Tech's
new weld on lower bracket. I think they are going to clean up the area. The plan is to move the arm over
another 1/2 which will allow me to fit the BFG 335. It will also allow me to fit the Michelin 345 which is an 1"
narrower then the BFG 335.

Before I bring the car to High Speed Welding I am going to cut off the spring perch's off the axle.





In order to get it back to High Speed Welding I used some of my extra parts. This cool little part came from
DSE. Originally I was going to keep the leaf springs but since they wouldn't sell me the front spring pocket
parts I needed that idea was soon scrapped. I made a quick call to Ride-Tech and purchased there
complete rear kit. So if anyone needs these brackets there just sitting on a shelf at my shop.

Priced to sell cheap !!!





Ready for Transport






Here are the new brackets from Ride Tech. They are really going to clean up the area.



Pictures hosted by www.garagescene.net