Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 13 of 13

    Threaded View

    1. #11
      Join Date
      Oct 2006
      Posts
      261
      Ok. I was just perusing a couple of web pages and it looks like you're about right. So I have a pendulum camber gauge but it's the type that you hold on by hand. If I read it right, I need to turn the wheel exactly 20* to the right, record the reading, turn the wheels exactly 20* to the left and subtract the smaller number from the bigger one and that will reveal my caster angle. I guess the "slip plates"(Linoleum with greese in between and degree markings) is just to make sure of the turning angles and to allow you to do it by hand with the full weight of the vehicle on.
      Doesn't sound to difficult but it will require me to source a couple of things I don't have readily laying at my fingertips. This may be the year that I scour the swap meets for some alignment tools. I might just make a run at the local tire/alignment shop to see how much they would charge just to check it.
      Thanks for the info.

      Robert






    Advertise on Pro-Touring.com