Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 44

    Thread: High vs low RPM

    Hybrid View

    1. wmhjr - just for clarrification...

      But for the OP, let's keep it simple. If your car will be mostly driven on the street, building tq from idle up is simpy wonderful. There is nothing like being in 5th (overdrive in a TKO600) and being able to simply press the gas pedal a bit to increase speed up a hill and pass somebody. And, the motor is not being pushed - and I'm using less fuel



      Thats Big Block?


      Don't forget though that I'm betting I'll go far longer between rebuilds as I'm making over 550lbs tq pretty much ALL of the time - through my entire rpm range - meaning I won't have to hammer my motor quite as much as somebody running for example a large displacement SBC. And I've got more material in my cylinder walls, etc.

      Thats Big Block also? Going far longer between rebuilds, saying the engine will last a lot longer (more durable/reliable)?

      While SB = lighter/better weight distribution? This can be overcome via other means if the choice is BB though cant it?


    2. #2
      Join Date
      Aug 2008
      Location
      Pgh, PA
      Posts
      2,177
      Quote Originally Posted by G-man View Post
      wmhjr - just for clarrification...

      Thats Big Block?


      Thats Big Block also? Going far longer between rebuilds, saying the engine will last a lot longer (more durable/reliable)?

      While SB = lighter/better weight distribution? This can be overcome via other means if the choice is BB though cant it?
      What I was trying to say is that you can certainly build a SB to generate tons of low end torque, but you'll make sacrifices. How exactly do you generate torque low? Think about it. Really it's like I said, this discussion isn't really about high vs low rpm. It's about more than that. Take for example the engine in a Honda S2000. Great little engine that makes good power. But down low it's not a rocket. You need to KEEP the motor revving high to make power. Now, if you could generate a flatter tq curve it would be a different story.

      But yes, I stand by my point that a flatter and higher tq curve motor that doesn't need to spin as hard and has more meat (like for example a long stroke BBC, a poncho SB) may be a more "driveable" and "reliable" choice for a mainly street car. For a pure race car it's way different.
      '66 GTO Vert Project "Red Ink", 462ci of stroked pontiac power, TKO600, SC&C Stg II+, Tubular lowers, Currectrac Rear suspension, Moser 12bolt w/Truetrack, Wilwood Master and discs all around, too much fun for words...




    Advertise on Pro-Touring.com