Results 1 to 6 of 6
-
10-29-2010 #1
348 block is cracked, time for a new plan!
I had been gathering parts to build a nice 383" 450 HP, 7000 rpm "W" Chevrolet from a 348 block to go in my '59 El Camino.
Turns out the block has a water-jacket crack.
Could be pinned and used, for a stock build, but not mine.
So now I need a new plan.
I have a fresh unfired STOCK (except for the Zero deck and balancing) 454 on the engine stand.
Not going to get many RPM out of that, it's also heavy, and BIG.
I Also have a good 350 4-bolt block sitting around.
I know LS engines are the big deal now, but I'm trying to keep a semblance of vintage feel to this car.
SB Chevy is a LOT less expensive to build than a 348 or 409 "W", even with trick parts.
Want 450+ HP and decent torque, would like to get fairly decent mileage.
I also have a weakness for engines that rev high.
Probably contradictory desires here.
I have the 350 block, the '59 will weigh in at around 4000 pounds.
Desired cruise speed is around 100 - 120, would like to top out a bit higher.
Built a 350, 383 other?At these prices I want my gas 100 octane, leaded, and my windshield washed!



Reply With Quote