Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 21

    Threaded View

    1. #13
      Join Date
      Nov 2002
      Location
      state of confusion
      Posts
      1,499
      Country Flag: United States
      What somebody needs to do is post is Figure 17.44 from RCVD (page 662).

      There's a kinematic construction line that can generally be taken as 0.375L. This is essentially a virtual link between the front eye and wherever the 0.375L intersects the center of the leaf as seen in side view. The leaf spring suspension's own roll axis is parallel to this construction and intersects at the rear roll center point in the pic that's already been posted. An 0.375L virtual swing arm is also parallel to this construction, and this extends forward from the axle center. This virtual swing arm is what defines the fore/aft motion of the axle at the leaf attachment lateral coordinates. And the slope of all three is the rollsteer percent.



      Note that this is kind of theoretical, as bushing compliance, lateral deflection of the shackle assembly, and torsional deformation in the leaves themselves is likely to throw the constructions "off" a bit. Even the slight flattening or exaggeration of the curvature as the suspension moves has a slight effect.

      Norm
      '08 GT coupe, 5M, suspension unstockish (the occasional track toy)
      '19 WRX, Turbo-H4/6M (the family sedan . . . seriously)
      Gone but not forgotten dep't:
      '01 Maxima 20AE 5M, '10 LGT 6M, '95 626, V6/5M; '79 Malibu, V8/4M-5M; '87 Maxima, V6/5M; '72 Pinto, I4/4M; '64 Dodge V8/3A





    Advertise on Pro-Touring.com