Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 21

    Threaded View

    1. #12
      Join Date
      Nov 2004
      Location
      Norway
      Posts
      97
      Country Flag: Norway
      Here you go: (Though a bit late!)



      So (ignoring the fact that the spring bends and 'moves'), to get roll understeer, I want the point 'R' to be higher than point 'Q', giving a slope lower in the front on the roll axis? And the front portion of the spring (between the front spring eye and the axle) to be as straight/flat as possible?

      From other books I have read, I have just thought getting the spring eyes almost at the same level (a little up in the rear), to minimize the built in roll understeer. Is the rear rollcenter height given from the line drawn through the front spring eye and the frame side of the shackle, as shown on the picture above, or through the spring eyes (ignoring shackle length)?

      Last edited by Chevy350; 03-12-2006 at 04:03 AM. Reason: Reading posted dates isn't a priority....
      Thanks, Christian (@v8power.net)
      '77 Caprice
      '71 Chevelle Nomad - Perfect for roadtrips!





    Advertise on Pro-Touring.com