Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 9 of 9

    Thread: Pad Alignment

    Hybrid View

    1. #1
      Join Date
      Oct 2006
      Location
      Pittsburgh Pa.
      Posts
      651
      Country Flag: United States
      I replaced the calipers that went with those pads with NAPA re-manufactured calipers (my business has been slow).. When things pick up, I'm thinking on getting the Wilwood D-52 double puck units... Do you sell them?



    2. #2
      Join Date
      Jan 2006
      Location
      Oregon
      Posts
      1,773
      Country Flag: United States
      Quote Originally Posted by pitts64 View Post
      I replaced the calipers that went with those pads with NAPA re-manufactured calipers (my business has been slow).. When things pick up, I'm thinking on getting the Wilwood D-52 double puck units... Do you sell them?
      We do. Something to note with the Wilwood D52 calipers is that you need to make sure the pads sit flush against the pistons if you're not using Wilwood pads. Wilwood doesn't include any backing plate shims with their pad kits, whereas many of the other aftermarket friction suppliers do and they can be attached in a variety of ways. An issue arises when the shims are riveted to the backing plates and those rivets are postioned to clear the OE single-piston configuration, not thet dual-piston Wilwood setup. A little work with a file or grinder and you should be good to go though.

      Tobin
      KORE3
      It's what I does.




    Advertise on Pro-Touring.com