Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 7 of 7

    Hybrid View

    1. #1
      Join Date
      Mar 2007
      Location
      Sacramento, CA
      Posts
      653
      Country Flag: United States

      LS1/T56 help needed- TO,scattershield,etc

      Hey guys I need a little direction with this T56 install. I've searched the boards for the answers, but can't seem to find my same combo. The Car's got an LS1 in it, but I have a bunch of new parts I have saved from other projects I'd like to employ here, but am not sure will work.

      what I have-
      LS T56
      new GM LS6 clutch/flywheel
      new Mcleod SBC scattershield
      new z bar, pedals, and manual clutch linkage
      Mcleod T56 face plate and TO bearing collar

      what I think I need still-
      extended pilot bushing to make up for the face plate (?)
      standard GM clutch fork and ball stud
      standard TO bearing
      I'll make my own crossmember

      I'm just not sure about this standard SBC scattershield I have. It's new and I know they bolt up to the LS engines minus one bolt hole. I'm just not sure about the Mcleod face plate/collar/extended pilot bushing depth. I'm trying to avoid dropping $450 on a new bellhousing when some of this stuff would work anyway. I'm probably making it harder by using my scattershield but I want mechanical linkage and I'm trying to use what I have. Any knowledge would help a bunch. I'm pulling out the auto tonight and getting ready for the T56. Thanks all, Dave

      Dave Smith
      29 Ford Roadster Pickup blown 327 and stupid
      67 Chevelle 396/5 speed PT
      65 El Camino L79


    2. #2
      Join Date
      Apr 2001
      Location
      The City of Fountains
      Posts
      16,130
      Country Flag: United States
      If you have all the parts in your hot little hands, why not do a little mocking up?

      I would first install the flywheel to the engine, but leave the clutch off. Install the transmission. Through the side hole in the bellhousing you should be able to see how well the input shaft mates with the pilot bearing.

      Next you can take some simple measurements to determine how well the bearing retainer collar will work with your particular clutch. Measure from the McLeod plate to the tip of the collar. Then install the clutch, and using a couple of steel rulers and squares, measure how far the clutch spring fingers are away from the block surface where the bellhousing mounts. Subtract that distance from the total depth of the bellhousing (measure the bellhousing on a flat bench, should be about 6.25"). Now compare that number with the one that you got for the length of the collar. I would want the collar to be about even with the clutch fingers, maybe a little forward.

      Andrew
      1970 GTO Version 3.0
      1967 Cougar build
      GM High-Tech Performance feature
      My YouTube Channel Please Subscribe!
      Instagram @dr__efi
      I deliver what EFI promises.
      Remote Holley EFI tuning.
      Please get in touch if I can be of service.

      "You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her

    3. #3
      Join Date
      Mar 2007
      Location
      Sacramento, CA
      Posts
      653
      Country Flag: United States
      Andrew- thanks for the post. I think that'll show me how this stuff will work as a whole. I just wasn't sure if anyone had ever tried this stuff with success.
      Dave Smith
      29 Ford Roadster Pickup blown 327 and stupid
      67 Chevelle 396/5 speed PT
      65 El Camino L79

    4. #4
      Join Date
      Aug 2004
      Location
      Walla Walla, WA
      Posts
      1,512
      Country Flag: United States
      Quote Originally Posted by NOPANTS-68 View Post
      Andrew- thanks for the post. I think that'll show me how this stuff will work as a whole. I just wasn't sure if anyone had ever tried this stuff with success.
      One of the first things I'd do is take a look at your headers and make sure there's room to run the Z bar for the mechanical linkage.
      Mike Kelcy - '68 Camaro with some stuff done to it.

    5. #5
      Join Date
      Apr 2001
      Location
      The City of Fountains
      Posts
      16,130
      Country Flag: United States
      Quote Originally Posted by Mkelcy View Post
      One of the first things I'd do is take a look at your headers and make sure there's room to run the Z bar for the mechanical linkage.
      Good call. Which brings up the question, how will you attach the Z-bar to the LSx engine? Using one of those little brackets I assume.

      Andrew
      1970 GTO Version 3.0
      1967 Cougar build
      GM High-Tech Performance feature
      My YouTube Channel Please Subscribe!
      Instagram @dr__efi
      I deliver what EFI promises.
      Remote Holley EFI tuning.
      Please get in touch if I can be of service.

      "You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her

    6. #6
      Join Date
      Apr 2001
      Location
      The City of Fountains
      Posts
      16,130
      Country Flag: United States
      Quote Originally Posted by NOPANTS-68 View Post
      Andrew- thanks for the post. I think that'll show me how this stuff will work as a whole. I just wasn't sure if anyone had ever tried this stuff with success.
      I always prefer seeing things come together first hand, instead of trusting some dude on the internet. Don't listen to me, check it out for yourself!

      Andrew
      1970 GTO Version 3.0
      1967 Cougar build
      GM High-Tech Performance feature
      My YouTube Channel Please Subscribe!
      Instagram @dr__efi
      I deliver what EFI promises.
      Remote Holley EFI tuning.
      Please get in touch if I can be of service.

      "You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her

    7. #7
      Join Date
      Mar 2007
      Location
      Sacramento, CA
      Posts
      653
      Country Flag: United States
      Quote Originally Posted by andrewb70 View Post
      I always prefer seeing things come together first hand, instead of trusting some dude on the internet. Don't listen to me, check it out for yourself!

      Andrew
      I'll take that advice! With the Edelbrock headers it looks like I have plenty of room at first glance. I planned on fabbing up a small pivot plate out of some 1/4 in. stock I have. The LS blocks have a bunch of unused holes I might be able to mount it to. Not sure yet. Man I wanna row this thing! I'll update as I go- thanks all.
      Dave Smith
      29 Ford Roadster Pickup blown 327 and stupid
      67 Chevelle 396/5 speed PT
      65 El Camino L79




    Advertise on Pro-Touring.com