Results 1 to 20 of 26
Thread: HQ Ute / ZO6 Drivetrain
-
09-04-2010 #1
Registered User
- Join Date
- Sep 2010
- Location
- Perth / Australia
- Posts
- 30
HQ Ute / ZO6 Drivetrain
Hi I thought I'd share my project and look for advice. I've got this project on Lateral-g and LS1Tech, hope you guys can give some good input to this project.
Basically I am taking one of these

and addind this package to it

The HQ will weigh 2860lbs.
Drivetrain: 2004 ZO6 Corvette
Engine: LS6 with a Kenne Bell Supercharger
Gearbox: M112 Tremec
Brakes: C6 ZO6 or?
Steering: Billet RHD Custom Corvette Rack
Rims: Rushforth 3 piece 20x 13 and 19 x 8
Tyres: Toyo 345/25/20 and 245/35/19?
-
09-04-2010 #2this looks like a very straight forward project, good luck with it
1993 mustang coupe 713 hp / 738 tq hellion turbo car.
aston martin vantage.........
1974 f 100, future pro touring truck!
09-04-2010 #3
Registered User
- Join Date
- Sep 2010
- Location
- Perth / Australia
- Posts
- 30
09-04-2010 #4
Registered User
- Join Date
- Sep 2010
- Location
- Perth / Australia
- Posts
- 30
The 2 keys to this project working is the 10 inches Lengthened torque tube and the RHD Corvette rack.



09-04-2010 #5
Registered User
- Join Date
- Sep 2010
- Location
- Perth / Australia
- Posts
- 30
The HQ Chassis is the same width at the front rails as the Corvette. The front rails are modified and will the be reboxed with a C notch for the front mount of the Corvette cradle.





09-04-2010 #6
Registered User
- Join Date
- Sep 2010
- Location
- Perth / Australia
- Posts
- 30
The rear rails have to be narrowed for the Corvette cradle. A recessed firewall and new tunnel is needed.


09-04-2010 #7



Reply With Quote