Results 1 to 3 of 3
Thread: help with patchs
Threaded View
-
08-16-2010 #3
Ideally you want to have a few coats of epoxy primer to prevent corrosion,I usually clean the bare metal and treat it with ospho prior welding and soak that area with ospho after ,let it sit for few minutes, then wipe off. once dry in few hours, scuff with red scotch pad, apply some epoxy primer. Always try to find access from the backside to treat new welds against corrosion, because you will find yourself fixing same spot again in few years. New welding seams attract corrosion like crazy, so treat them ASAP.

Do what's right,not what's easy
69 Firebird
71 Cuda
98 Supra 6speed white APU
98 Lexus GS400tt widebody
Elite Custom Body
Stefan B.
-





Reply With Quote



