Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 5 of 5

    Thread: Brake Bleeding?

    Hybrid View

    1. #1
      Join Date
      Nov 2008
      Location
      So. Cal.
      Posts
      1,240
      Country Flag: United States
      Quote Originally Posted by wmhjr View Post
      Probably a dumb question, but you did bleed both inside and outside fittings on each caliper, right? Wilwood says to bleed outside and then inside for each caliper.
      NOT a dumb question at all. Well for you, but for a dummy like me it would have saved me some......

      I just bled my system. Simple GM calipers at the back, done. And Ill interrupt. I use the speed bleeders or what are they called? Oh, I guess thats it. Had to go check. Russell makes them. Anyway, the back half seemed to bleed ok, couldnt tell until I got the front half done. And stupid me, thinking about speed and being impatient (my complete road to ALL my failures) I opened up both bleeders on the front caliper I was bleeding. I have wilwood calipers on the front, two bleeders per caliper. So I went along, happy as can be, bleeding away. Right side, then left. Crap, there was a stiff pedal but not what I thought it should be. So I thought my proportioning valve which was have closed might have interupted the flow of air bubbles to the rear. I bought another quart of fluid and opened the valve all the way up and proceeded to pump more fluid through the rear calipers. Its so easy to pump ALOT of fluid through the speed bleeders. They really do their job. And they dont let any air flow back through the bleeder.

      Then I went to the front and re-bled those, the same way, both bleeders open on one caliper.... WRONG!!! And its prolly in the instructions somewhere Im sure. Did I read them, well, you know the answer to that.



      Then it clicked. The fluid is gonna take the path of least resistance. Thats gonna be the side of the caliper that is already flowing. So I closed off the inside bleeder and bled the outside bleeder. And I could see the tube from the bleeder. All fluid, no bubbles. Then I closed down the outside bleeder and opened the inside. First press of the pedal and yeah!!!! Bubbles. Alot.. So... I bled the fronts completely and sure enough, a solid pedal. Brakes are back in business.

      I was short thinking the entire process, just going off of what I had done before with single bleeder calipers. And trying to take the short road to bleeding them. MY mistake. If I would have slowed down a second and read the bleeding instructions then I would have saved a quart of fluid and time. Luckily I have the time and the fluid is inexpensive. So I got a learning experience for not alot of cost. Better than some of my screw-ups. More money and time. JR
      What I write is opinion, none of it is factual. 2010

      Even though I'm conscious it doesn't mean I'm coherent. 2011

      I'm getting better with age. Best thing about old age is I don't know any better. 2012





    Advertise on Pro-Touring.com