Results 1 to 20 of 231
Hybrid View
-
02-15-2010 #1
I too will be watching this build, especially now that it will be coming back together soon.
As Steve mentioned a couple pages back, if you ever need any help about the bumper mounts and modifications with the Marquez valance, don't hesitate to ask.
Matt
-
02-15-2010 #2Brian Finch
Pro-touring Hero
The Proof is on the Pavement
Sponsored by Baer Brakes, JRI Shocks, Pennzoil, Tremec, Magnaflow, Centerforce, AFCO Racing, Kurt Urban Performance, Amercian Powertrain, Forgeline, Holley, and of course BFG.
For the best engine money can buy please visit http://www.kurturbanperformance.com/
Authorized dealer for Baer, Ridetech, Detroit Speed, Vintage Air, Motorstate Distributing, Wilwood Engineering, American Autowire, Forgeline, Holley, Afco,
Contact brian@finchperformance for special Pro-Touring.com member pricing
www.hotrodtransformations.com
02-15-2010 #3Quick update for those keeping track. Layed a full coat of Epoxy over the entire car at lunch followed by 2 coats of 2k this afternoon so will be ready to block it out with 220 tomorrow.
Also on the vette the car is 80% blocked out in 180 and should get the second coat of Polyester primer tomorrow and be in epoxy by the weekend. Plan to shoot it the week of 3/1 as I have another track day at the super speedway on 3/6 and need to have it cleared by then so I can relax and drive fastBrian Finch
Pro-touring Hero
The Proof is on the Pavement
Sponsored by Baer Brakes, JRI Shocks, Pennzoil, Tremec, Magnaflow, Centerforce, AFCO Racing, Kurt Urban Performance, Amercian Powertrain, Forgeline, Holley, and of course BFG.
For the best engine money can buy please visit http://www.kurturbanperformance.com/
Authorized dealer for Baer, Ridetech, Detroit Speed, Vintage Air, Motorstate Distributing, Wilwood Engineering, American Autowire, Forgeline, Holley, Afco,
Contact brian@finchperformance for special Pro-Touring.com member pricing
www.hotrodtransformations.com
02-18-2010 #4
03-02-2010 #5Finally getting around to posting some updates. I painted the Cage, Dash and Firewall in a satin black and sprayed some bedliner on the floors.
While I have been busy on the body and paint the owner installed the engine and trans in the subframe and has the rear end powder coated and ready to drop in.
Brian Finch
Pro-touring Hero
The Proof is on the Pavement
Sponsored by Baer Brakes, JRI Shocks, Pennzoil, Tremec, Magnaflow, Centerforce, AFCO Racing, Kurt Urban Performance, Amercian Powertrain, Forgeline, Holley, and of course BFG.
For the best engine money can buy please visit http://www.kurturbanperformance.com/
Authorized dealer for Baer, Ridetech, Detroit Speed, Vintage Air, Motorstate Distributing, Wilwood Engineering, American Autowire, Forgeline, Holley, Afco,
Contact brian@finchperformance for special Pro-Touring.com member pricing
www.hotrodtransformations.com
03-02-2010 #6Now onto the good stuff. After wet sanding the final epoxy coat with 600 I layed down 3 coats of color and 4 coats of clear. I should have everything shot by the end of next weekend and assembly can begin.
Grenade Green...
Brian Finch
Pro-touring Hero
The Proof is on the Pavement
Sponsored by Baer Brakes, JRI Shocks, Pennzoil, Tremec, Magnaflow, Centerforce, AFCO Racing, Kurt Urban Performance, Amercian Powertrain, Forgeline, Holley, and of course BFG.
For the best engine money can buy please visit http://www.kurturbanperformance.com/
Authorized dealer for Baer, Ridetech, Detroit Speed, Vintage Air, Motorstate Distributing, Wilwood Engineering, American Autowire, Forgeline, Holley, Afco,
Contact brian@finchperformance for special Pro-Touring.com member pricing
www.hotrodtransformations.com





Reply With Quote





